810808
44
Zoom out
Zoom in
Previous page
1/52
Next page
44
ENGLISH
FUEL
The stove was designed to burn wooden logs or
sawdust briquettes.
Use dry wood logs (max. humidity 20%)Use logs with
a maximum length around 33 cm vertically and 25 cm
horizontally and a maximum diameter of 20-30 cm The
use of damp wood would cause the product and the
flue to get dirty, the risk of smoke and a lower yield
than that declared.Each type of wood has different
characteristics that also influence combustion yield.
The data outlined on this manual are with wood used
during certification.
In general wood can have a heat of combustion up to
4.5 kWh/kg while cut fresh it has heat of combustion
around 2 kWh/kg
In general, beech or elm is recommended, or however
class A1 wood according to UNI EN ISO 17225-5
Attention to prolonged use of wood with aromatic oils
(e.g. eucalyptus). Cast iron parts can deteriorate
Use the recommended quantities of wood:
Overloading causes overheating, resulting in damage:
possible deformation of the inner parts;
possible irreversible changes to the colour of the
paint on the metal parts
for which Edilkamin or the retailer cannot be held liable.
To respect the environment and safety, do NOT burn,
among other things: plastic, varnished wood, coal and
bark waste.
Do not use the stove as an incinerator.
Use of these fuels also nullifies the guarantee.
ISTRUCTIONS FOR USE
AIR ADJUSTMENT
Move the air adjustment lever forward or back to allow
more or less combustion air in the combustion chamber.
- “Brazier Maintenance” position (Fig. 1)
Air valve command withdrawn.
This position is used to extend combustion (for example at
night, or when you are not at home) so the product goes to
the minimum, saving fuel and maintaining the flame.
- Intermediate position (Fig. 2)
Command in intermediate position.
This position allows combustion completion.
- “Switch on”/max power position (Fig. 3)
Air valve command totally extracted.It has the purpose of
bringing a large quantity of air in the fireplace to enable
quick and efficient lighting of the fire. Useful to switch on a
cold stove and give maximum power in the fireplace.
FIG. 1
FIG. 2
FIG. 3
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Edilkamin Tally Up at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Edilkamin Tally Up in the language / languages: English as an attachment in your email.

The manual is 15.05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Edilkamin Tally Up

Edilkamin Tally Up Usermanual and installation guide - German - 52 pages

Edilkamin Tally Up Usermanual and installation guide - Dutch - 52 pages

Edilkamin Tally Up Usermanual and installation guide - French, Italian - 100 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info