810923
25
Zoom out
Zoom in
Previous page
1/32
Next page
25
ENGLISH
INSTALLATION
INSTALLATION ON AN OPEN EXPANSION
VESSEL CIRCUIT
• The appliance and circuit must be filled with the
expansion vessel open, with the water fed by
gravity via the charging line (dia. at least 18 mm).
While this is being done, all radiator bleed cocks
must be open to prevent air bubbles forming in
the circuit and preventing the water circulating
properly.
• The open vessel must be at least 3 m higher than
the highest point of the primary circuit, and 15 m
lower than the product’s delivery. The height of the
vessel must in any case be such as to generate
greater pressure than that of the circulation pump.
• Never fill the circuit directly with mains supply
pressure, since this may be in excess of the
appliance’s pressure rating and result in damage
to the appliance itself.
• The safety line to the expansion vessel must be
able to vent freely without cocks and insulated to
prevent water freezing inside it, which can damage
the union.
• The charging line must be free, without cocks or
bends.
• Do not exceed an operating pressure of 1.5 bar.
• We recommend adding antifreeze to the water in
the circuit (refer to UNI 8065 or similar standard).
INSTALLATION ON A CLOSED EXPANSION
VESSEL CIRCUIT (supplementary instructions to
those for the closed vessel installation)
FOR SYSTEMS WITH CLOSED EXPANSION VESSEL:
THE BOILER STOVE MUST BE FITTED WITH THE
OPTIONAL THERMAL DISCHARGE VALVE.
The pressure upline of the cooling circuit must be at
least 1.5 bar (UNI 10412/2 par. 6.2).
The thermal discharge valve (VST - provided by
Edilkamin) must be connected to the cooling circuit
(AL) with a pressure of at least 1.5 bar.
S = discharge
Edilkamin provides a series of preassembled kits, available from your reseller
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Edilkamin Tally H at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Edilkamin Tally H in the language / languages: English as an attachment in your email.

The manual is 8.21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Edilkamin Tally H

Edilkamin Tally H Usermanual and installation guide - German - 32 pages

Edilkamin Tally H Usermanual and installation guide - Dutch - 32 pages

Edilkamin Tally H Usermanual and installation guide - French, Italian - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info