810770

Edilkamin Story Manual

35
Zoom out
Zoom in
Previous page
1/209
Next page
- 35 -
ENGLISH
2nd SOLUTION: KIT 11 BIS (code 645710) - NON-ADJACENT ROOM ONLY
Note: THE PIPES ON THE HOT AIR OUTLETS MUST BE FITTED BEFORE APPLYING THE COVERINGS AND
PRIOR TO DISASSEMBLY OF THE UPPER CAST IRON SIDE FLANK. THE FIRST PART OF THE FLEXIBLE
PIPE MUST BE COMPLETELY “RELAXED” IN SUCH AWAY TO ELIMINATE CORRUGATION. IN THIS WAY,
THE INTERNAL DIAMETER WILL BE SLIGHTLY ENLARGED TO FAVOUR ENTRANCE.
- Defi ne the position of the stove with respect to the walling (fi g. a).
- Disassemble the upper part of the back (132) and remove one of the two predrilled caps in correspondence with the hot air outlet
pipes (fi g. b).
- Activate the hot air channelling control lever (13), removing the locking plate (133) (fi g. b).
- Cut the fl ue cover to size (6) on the wall side (fi g.c)
- Place the stove in its defi nite position.
- Extend the aluminium pipe (2) for hot air channelling, without connecting the stove outlet.
- Fit the medallion (5) on the aluminium pipe and the pipe cover (6a) without locking it in (fi g. c).
- Fit the aluminium pipe to the hot air outlet on the back of the stove (8) (fi g. d).
- Replace the upper part of the back (132).
- Place the pipe cover (6) in the defi nite position and fasten it to the back of the stove with the supplied screws (7) (fi g. d).
- Install the terminal outlet (4) and its aluminium pipe (2) fastening it with the wall collar (9) and the dowels with screws (10-11) (fi g. d).
- Fasten the wall medallion (5) with silicone (fi g d).
INSTALLATION
n° KIT 11 BIS
1 Box 1 643910
2 Ø 10 pipe 1 643900
4 Smoke outlet end-piece 1 293430
5 Wall medallion 1 644190
6a Flue cover 1 645730
7 Flue cover fastening screws 4 168260
8 Pipe blocking clamp 2 46160
9 Wall collar 2 645750
10 Screws 4 8410
11 Dowels 4 8520
6
7
5
4
2
1
6a
8
9
9
10 11
132
132
13
133
2
5
6
4
8
6
8
5
7
fi g. a fi g. b
fi g. c
fi g. d 10
2
4
9
9
5
6
10
8
… 35 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Edilkamin Story at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Edilkamin Story in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info