496602
16
Zoom out
Zoom in
Previous page
1/77
Next page
- 16 -
ENGLISH
ENGLISH
TECHNICAL AND HEATING SPECIFICATIONS
Hopper capacity 20 kg
Efciency 85 %
Power output 9,3 kW
Autonomy min/max 9/18 hours
Flue consumption min/max 1,1/2,2 kg/h
Heating capacity * 260 m
3
Weight including packaging min/max 141/186 kg
Smoke duct diameter (A female) 80 mm
Air inlet duct diameter (B male) 40 mm
ELECTRICAL CHARACTERISTICS
Power supply 230Vac +/- 10% 50 Hz
On/off switch Yes
Average power consumption 150 W
Power consumption during ignition 400 W
Remote control frequency (optional) Infrared
Protection on mains power supply ** 2A, 250 Vac Fuse 5x20
Protection on electronic circuit board 2A, 250 Vac Fuse 5x20
SAFETY DEVICES:
THERMOCOUPLE:
placed at the smoke outlet to detect the temperature.
Turns the stove on and off and controls its operation based on
dened parameters.
AIR FLOW SENSOR:
installed at the intake duct, it trips when the combustion air  ow is
not correct, causing low pressure problems in the smoke circuit.
SAFETY THERMOSTAT:
trips when the temperature inside the stove is too high.
It stops pellet loading, causing the stove to shut down.
* The heatable room dimensions are calculated on the basis of
pellets with an lhv of at least 4300 kcal/kg and home insulation in
compliance with Italian law 10/91, and subsequent changes toge-
ther with an expected heat output of 35 Kcal/m³ per hour.
* It is also important to consider the position of the stove in the
room to be heated.
N.B.
1) bear in mind that external devices may cause interference.
2) caution: live parts. Servicing and/or inspections must be carried out by qualied staff.
(Before carrying out any maintenance, disconnect the device from the mains power supply)
FUSE
**two fuses are inserted on the socket
behind the stove, tted with a switch one
is functional and the other is spare.
*
*
The Dealer can install an optional
on the AUX outlet (clean contact
on the pins) for controlling the
process of switching on and off
(e.g. telephone remote, local thermostat), located at the
rear oh the stove. Can be connected via special optional
trestle (code 621240).
BACKUP BATTERY
A backup battery is found on the control board (3-Volt
CR 2032 battery). Its malfunction is indicated with the
following messages: (not considered a defect but due
to normal wear-and-tear): ERROR RTC CD. For more
detailed information, please contact the DEALER who
has performed the rst 1st ignition.
SERIAL PORT
backup
battery
Connessionicavocombinatoretelefonico
Pin6epin7 Pin2epin6
620550 621240
pin 6
pin 2
SMOKE RPM
ROOM
TEMPERATURE
SENSOR
FLOW
SENSOR
SMOKE EXTRA-
TION MOTOR
FEED
SCREW
MOTOR
VENTILATION
IGNITION RESISTANCE
230 VAC PO-
WER SUPPLY
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Edilkamin marea at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Edilkamin marea in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 1,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info