Manual Edilkamin Lux (page 13 of 62) (English, German, Dutch, French, Italian, Spanish)

810742

Zoom out

Zoom in

1/62

- 13 -

ENGLISH

For only one

adjacent room

1 KIT 8

For two adjacent

rooms use

2 KIT 8

For one adjacent

room use

1 KIT 9

Fig. A Fig. B Fig. C

PRINCIPLE OF OPERATION

Range of wood burning stoves with hot air production.

The stoves are built with a cast iron front, whilst the structure of

the ﬁ rebox is made of extra-thick steel.

The entire ﬁ rebox is covered in ECOKERAM®, a special refrac-

tory material obtained from casting.

All models are equipped with secondary and tertiary air injec-

tion, the latter is used for cleaning the glass.

The ﬂ ue pipe can be connected at the top or rear of the stove to

facilitate installation.

Two different operating modes are used to control combustion air:

- AUTOMATIC

- MANUAL

There are two controls located on the lower grate of the stoves:

- “automatic” mode selector switch (S).

- lever for adjustment in “manual” mode (L).

Manual mode:

Position the switch “S” to MANUAL, fully inserted in the cast

iron grate; the control lever “L” controls the amount of air and

therefore the strength of the ﬂ ame from minimum (lever posi-

tioned on the left) to maximum (lever positioned on the right).

Automatic mode:

Position the switch “S” to AUTOMATIC, fully withdrawn

from the grate; the lever “L” must be moved fully left.

In this way, thanks to a thermostatic valve, the stove will auto-

matically adjust the strength of the ﬂ ame according to the tem-

perature of the ﬁ rebox: when the ﬁ rebox is cold, for example on

ignition, the valve will allow the maximum amount of air in to

facilitate this stage; as the temperature in the ﬁ rebox increases,

the valve will slowly decrease the amount of air allowed in,

preventing overheating in the room where the stove is installed

and excessive and unnecessary consumption of wood.””

The stoves are equipped with an 800 m³/h fan that can be adju-

sted from the mimic panel. This makes it possible to channel hot

air so that it can be conveyed to heat rooms adjacent to the place

of installation.

Two Ø10 cm male pipe unions are located on the back of the

stove for connection of the hot air ducting.

KIT 8 or KIT 9 can be used to heat one adjacent room.

• Kit 8 can be used to convey some of the hot air to an adjacent

room and some to the place of installation (Illustr. A).

• Kit 9 can be used to convey all of the hot air produced to an

adjacent room (Illustr. B).

Two Kit 8s must be used to heat two adjacent rooms

(Illustr.C)

HOT AIR CIRCULATION

1) air inlet

2) outlet for hot air conveyable to adjacent rooms

3) outlet for hot air in the room

4) upper smoke outlet

5) rear smoke outlet

6) hot air fan

Auto/man.

selector switch Manual adjustment lever

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Edilkamin Lux in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 4.69 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Edilkamin Lux Manual

Product: