Manual Edilkamin Logo (page 30 of 146) (English, German, Dutch, Danish, French, Italian, Portuguese, Spanish)

810792

Zoom out

Zoom in

1/146

- 30 -

ENGLISH

INSTRUCTIONS FOR USE

In the same way, adjust the shutdown times. The program

is conŎ rmed by pressing the MENU button when ‘Save

OK’ appears on the display.

When conŎ rming the ‘Weekly program’ the day to which

the program is to apply must be selected:

1 Mon; 2 Tues; 3 Wed; 4 Thurs; 5 Fri; 6 Sat; 7 Sun

Once you have chosen the day by scrolling through them

with the + and – keys, conŎ rm by pressing MENU and

proceed with the settings of the programs in the same way

as for the ‘Daily program’, selecting whether or not to

enable a program for each day of the week and choosing

the number and times of interventions.

Should you make a mistake whilst setting the programs

you can exit without saving by pressing the 0/1 key.

Note on ŏ ame variability

The ŏ ame may vary depending on the type of pellets

used, in addition to normal variability of the solid fuel

ŏ ame and regular cleaning of the combustion chamber

carried out automatically by the stove.

N.B. The automatic cleaning process performed by the

stove does not replace the need for the user to vacuum the

stove when cold, prior to ignition).

Pellet reserve warning

Stoves are equipped with an electronic pellet detection

system.

The detection system is integrated into the electronic

control board, allowing the stove to monitor how many

kilos of pellets are left. This veriŎ cation is implemented

at any point whilst the stove is in operation mode.

For correct system operation, it is important that the

following procedure is adhered with during the Ŏ rst

ignition (that must be implemented by the DEALER).

Before starting to use the pellet detection system, you

must load and consume a full sack of pellets. This

allows for a brief running-in of the loading system.

Hence, load 15 kg of pellets.

Then press the ‘reserve’ button once, thereby storing

the data into the memory that 15 kg have been loaded.

From now on the display will show the remaining pellets

as they decrease in kg (15…14...13).

Each time pellets are reloaded you must enter the quantity.

E.g. when loading 15 kg, simply press the ‘pellet

load’ button to enter this into the memory. For other

quantities, or in the event of an error, you can specify

the quantity using the pellet reserve menu as follows:.

Press the MENU button for 2 seconds to view the SETTINGS.

Press + or – consecutively to view T. Max E.

ConŎ rm by pressing MENU and the remaining quantity

of pellets will be displayed + that being loaded

(default is 15 and can be changed using the +/- keys).

Should the hopper run out of pellets, the stove will

block and ‘Stop/Flame’ will appear (see page 35).

Note: Every now and again remember to reset the “pellet

reserve warning” for it to function in a more reliable

manner.

For any clariŎ cation please contact the authorised

DEALER who performed the Ŏ rst 1st ignition.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Edilkamin Logo in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 5.25 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Edilkamin Logo Manual

Product: