810777

Edilkamin Kikka Plus - 2016 Manual

43
Zoom out
Zoom in
Previous page
1/210
Next page
- 43 -
ENGLISH
INSTRUCTIONS FOR USE
LOADING THE SCREW FEEDER
(with the stove oFF - Function not active with
timer ON)
Loading the pellet screw feeder (coclea) is only necessary if the
stove is new (and being switched on for the fi rst time) or if the
stove had completely run out of pellets.
To activate this refi ll operation press the button for a few
seconds and scroll down the parameters on the display using
the same button until it displays the word “Menu”.
Confi rm with the button and scroll down through the
Menu, using the button until it displays the message
“Load” and confi rm with the button.
By confi rming the “Load” option you automatically return to
the main screen and the stove is forced to the specifi c “Load”
phase lasting 240 seconds.
To stop prematurely, press the tbutton holding it down
for a few seconds. The stove will return to “oFF”. The “Load”
sub-menu is available to users only if the stove is OFF.
IGNITION
By pressing the button, the message “Load” appears on
the display (this is the pre-load phase prior to ignition).
The display will then automatically show the message “Strt”
and when the pellets have been ignited the word “FirE” appe-
ars.
At this point, the stove ignition is completed and it can operate
in manual mode or automatic mode.
SWITCHING OFF
If you press the
button for a few seconds, the switch-off
phase will start.
During the switch-off phase the words “doWn” and “cooL”
appear on the display.
You will not be able to switch the stove back on again; once the
switch-off phase is completed, the system will automatically go
back to stand-by mode (the word OFF appears on the display).
MANUAL/AUTOMATIC SETTING
Press the button for a few seconds and scroll down
the parameters on the display using the same button until it
displays the word “Menu”.
Confi rm with the button and scroll down through the
Menu, using the button until it displays the message
“Auto” and confi rm with the button.
To set the AUTOMATIC mode, press the button and the
message “A on” is displayed. Confi rm with the button.
To set the MANUAL mode, press the button and the
message “A off” is displayed. Confi rm with the button.
At this point, the word “Auto” appears on the display. Scroll
down through the Menu by pressing the , button and
when the word “quit” is displayed confi rm with
button, scroll down by pressing the button until the
word “quit” is displayed and press the button
AUTOMATIC REGULATION
By briefl y pressing the
sbutton, the message SET ROOM
appears on the display, and it sets the value at which you want
the stove to work.
To activate the automatic mode, set to “A on” as described in
the previous paragraph.
MANUAL REGULATION
By briefl y pressing the
button, the message SET ROOM
appears on the display, by briefl y pressing the
button, the
message SET POWER is displayed.
You can increase the desired power (from P1 to P5) by pressing
the button or decrease it by pressing the button.
To activate the manual mode, set to “A off” as described in the
previous paragraph.
In both regulation modes, by briefl y pressing the button,
the main screen is displayed.
If no button is pressed within a certain time, the display will
show the main screen automatically.
ECO STOP FUNCTION
By briefl y pressing the buttons, the mes-
sage “E on” is displayed (function ON) or “E off” (function
OFF).
To activate the ECO STOP function, press the button and
the message “E on” is displayed and confi rm with the .
To deactivate the ECO STOP function, press the button
and the message “E off” is displayed and confi rm with the
.
It can only be activated in automatic mode (“A on”).
It is a function that is suitable when the stove is installed in
small rooms or, during mid-seasons, when even a minimum
power setting still tends to overheat the room.
This function is managed automatically, and allows you to
switch off the stove when the desired room temperature is
exceeded.
When the room temperature falls below the set value, the stove
automatically switches back on.
… 43 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Edilkamin Kikka Plus - 2016 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Edilkamin Kikka Plus - 2016 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 4.79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info