Manual Edilkamin Kelly (page 41 of 208) (English, German, Dutch, French, Italian, Spanish)

810817

Zoom out

Zoom in

1/208

ENGLISH

INSTALLATION

SMOKE EXHAUST

Tiny and Kelly are designed to have the smoke exhaust pipe connected to the top, the back or the right side. The stove

is supplied already set up for a top-connecting smoke exhaust pipe.

CONNECTING THE SMOKE EXHAUST PIPE ON THE TOP

In order to connect the pipe (not supplied) simply fit it onto the elbow joint (G-fig.5) which is already mounted on the

stove and accessible by opening the righthand glass door (fig. 5). An inspection lid for cleaning (H) is located on the

elbow joint (G). When using the top outlet you must use the pre-cut lid (C - fig. 1 on page 39) by removing the dia-

phragm C2, in place of the uncut lid (D - fig. 1 on page 39).

CONNECTING THE SMOKE EXHAUST PIPE ON THE BACK

To set up the stove with the smoke exhaust on the back simply loosen the locking clamp (F-fig.5/6) of the elbow joint

and rotate it by 90 degrees. By doing so you can connect the pipe to the back by passing it through the hole located at

the bottom of the sheet metal back.

CONNECTING THE SMOKE EXHAUST PIPE ON THE SIDE

By removing the elbow (G-fig.6) you can connect the smoke exhaust pipe to the side (fig. 7) through the hole located

on the ceramic side. To do this, simply remove the pre-cut diaphragm from the righthand sheet metal side of the side

ceramic support to allow the pipe to pass through (in this case, the ceramic cap is not used).

The elbow (G) can be used externally to collect condensation.

AIR INTAKE

There must be an air inlet behind the stove with a minimum diameter of 80 cm².

This must be connected to the outside in order to guarantee sufficient air supply to the stove for combustion.

There is a hole (U - fig. 8) on the back of the stove designed to set up an air inlet connected directly to the outside.

By opening the front left-hand side door (fig. 7) it is possible to detach the flexible pipe (T) from its support (S) and

push it through the hole (U) on the back of the stove.

This pipe (T) will then have to be connected to the outside.

In this case, there may be condensation problems and it is necessary to protect the air intake with a grille, which must

have a free section of at least 12 cm².

In the case of wall-mounted stoves, an air intake connected with the outside is required.

The pipe must be less than 1 metre long and have no bends.

It must end with a section at 90° facing downwards or be fitted with a wind guard.

Fig. 5 Fig. 7

Fig. 6

Fig. 7

Fig. 8

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Edilkamin Kelly in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 8.89 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Edilkamin Kelly Manual

Product: