WEEKLYTIME PROGRAMMER BUILT INTO PANEL
The concept of the weekly time programmer built into the central panel
It is possible to set 3 ignition programmes:
Pr 01 with settable on and off times;
Pr 02 with settable on and off times;
Pr 03 with settable on and off times.
It is possible to enable one or more of the three settings on each day of the week (day1 = Monday, day2 =
Tuesday…day7 = Sunday).
When on standby, the display alternates between showing the ignition mode (P1, P2, P3 or a temperature) and the
clock. Refer to page 10 for each of the buttons to press.
Setting the clock
Hold the MENU key down for about two seconds until tS appears. Press the MENU key three times until Prog appears.
Press the "-" key until SEt appears. Press the MENU key until the clock appears. It may be changed with the "-" key,
which decreases the time by one minute each time it is pressed, and with the "+" key, which increases it by 15 minutes
each time it is pressed. Once the time is set, confirm with the MENU key. The day number appears (day1=Monday,
day2=Tuesday… day7=Sunday), which can be changed with the "-" and "+" keys. Confirm with the MENU key.
Prog appears. Press the 0/1 key to quit clock setting.
Enabling programmes
Hold the MENU key down for about two seconds until tS appears. Press the MENU key three times until Prog appe-
ars. Press the "+" key until Pr OF appears. Press the MENU key until OFF appears. Press the "+ " or "-" key until ON
appears. Confirm with the MENU key. Prog appears. Press the O/1 key to return to standby. When the stove is in Pr
mode, it responds to programmed on and off times.
Setting a programme (e.g. Pr01)
Hold the MENU key down for about two seconds until tS appears. Press the MENU key three times until Prog appe-
ars. Press the "+" key twice until Pr1 appears. Press the MENU key until On P1 appears together with the "on time". It
may be changed with the "+" and "-" keys in ten-minute intervals. Press the MENU key to confirm. OfP1 appears
together with the off time. This may be changed with the "+" and "-" keys in ten-minute intervals. Press MENU to
confirm. "Of d1" appears (which means program 1 is not enabled on day 1, Monday). This may be changed into Ond1
(which means program 1 is enabled on day 1, Monday) using the "+" and "-" keys.
Press MENU to move on to the second day, and so on until day 7.
Press the MENU key again and Prog appears. To quit programming press the 0/1 key.
On and off times may be set for Pr 2 and Pr 3 in a similar way, and it can be decided which days they are enabled on.
ENGLISH
22