810890
14
Zoom out
Zoom in
Previous page
1/52
Next page
14
ENGLISH
OPTIONAL HYDRAULIC KIT
All kits are supplied with instructions for their connection to the boiler stove
Edilkamin technicians have a paper template suitable for each product. Make sure the correct one is used for the
product being installed.
Position the template so as to be flush with the floor and aligned with the left side of the maximum space occupied
by the boiler stove.
Be sure to respect the correct installation clearances away from flammable materials and for maintenance operations.
WATER CIRCUIT INSTALLATION
HEATING AND INSTANT DOMESTIC HOT WATER
The combinable Kits are:
• Kit R
• Kit RW
• Kit R2
The demand for heating can be made:
by the room temperature probe (if the read temperature falls 1°C below the set temperature);
by the flow switch, following the opening of the hot water tap.
The demand for heating is represented by a radiator or by a tap on the display.
HEATING AND BOILER FOR DOMESTIC HOT WATER
The Kits combinable with the boiler are:
• Kit R
The demand for heating can be made:
by the room temperature probe (if the read temperature falls 1°C below the set temperature);
by the boiler thermostat/probe demanding domestic hot water.
If there is a request for domestic hot water, the pump of the boiler stove turns on if the temperature of the boiler
stove is 5°C above the temperature of the boiler; if this happens the three-way valve deviates to the domestic water
supply. The distribution pump is off.
COMBINATION WITH ACCUMULATOR TANK
The Kits combinable with the accumulator are:
• Kit R
The accumulation probe must be set as accumulator tank probe
The demand for heating can be made:
by the thermostat/probe of the accumulator tank.
The pump of the boiler stove ensures the heat transfer from the boiler stove to the accumulator tank.
The (secondary) booster pump provides heat transfer from the accumulator tank to the system.
The timer programming on the display applies to the (secondary) booster pump.
These pages only include indications of possible installations and uses which must be
defined together with the installer and the Technical Assistance Centre during first ignition.
EXAMPLES OF HYDRAULIC INSTALLATION
N.B.: These diagrams are for guidance only, the correct execution is the responsibility of the
plumber and the parameters must be set by the Technical Assistance Centre during first
ignition (commissioning).
HEATING ONLY
The combinable Kits are:
• Kit R
• Kit R2
The demand for heating can be made:
by the room temperature probe (if the read temperature falls 1°C below the set temperature).
The demand for heating is represented by a radiator on the display.
USER/INSTALLER
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Edilkamin GORA 2 Slim Up at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Edilkamin GORA 2 Slim Up in the language / languages: English as an attachment in your email.

The manual is 1.51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Edilkamin GORA 2 Slim Up

Edilkamin GORA 2 Slim Up Usermanual and installation guide - French - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info