810851
15
Zoom out
Zoom in
Previous page
1/24
Next page
15
ENGLISH
INSTALLATION
INSTALLATION OF HOT-AIR CIRCULATION INSTALLATION OF HOT-AIR CIRCULATION
KITSKITS
There are three kits for ducting hot air that include
everything necessary for the following three cases:
KIT UNOKIT UNO
(fig. D - E) only the fireplace room
- remove the two pre-cut plugs from the Firebox®
cover by pressing inwards;
- fasten the two connectors on the holes inthe hood;
- insert the two pipes and fi x them with the clamps
provided;
- attach the two outlet “B2” frames with connection
pipe to the top of the mantel;
- attach the two slots “G1” to the bottom of the mantel;
- connect the two aluminium connection
pipes and fasten with clamps; fi t the two front
grilles and click them into place.
KIT DUEKIT DUE
(fig. F) fireplace room, plus one adjacent
room
Proceed as for kit one, fi tting one complete outlet “B1”
to the top of the mantel instead of two “B2”, and an
outlet “B3” to the wall of the room to be heated.
At the base of the mantel, only one slot “G1” is required.
KIT TRE KIT TRE
(fig. G) fireplace room, plus two adjacent
rooms
Proceed as for kit one, fi tting the two “B3” outlets
to the walls of the rooms to heat instead of the two
“B2” outlets.
This kit entails the use of a slot (G1) in the top of the
mantel to allow ventilation inside the mantel itself.
NATURAL CONVECTIONNATURAL CONVECTION
This occurs when the air circulates naturally in
the cavity and ducting by exploiting convection
(the physical principle that causes hot air to rise).
FORCED VENTILATION FORCED VENTILATION
(fig. H)
This is achieved with the use of two fans (17) inserted
in the lower part of Firebox®, a temperature thermostat
housed next to one of the two fans and a two-speed
switch (18) to be placed near the fi replace.
Connecting the forced-ventilation equipment:
- connect the switch to the fans by inserting connector
(M) into connector (F).
- connect the switch to the 230 VAC mains using the
plug (S).
Operation of the two-speed switch:
- to start the fans, set the switch to “manual” (first or
second speed as desired).
- to stop the fans set the switch to “automatic”
N.B.: in the “automatic” position, the fans operate
automatically when the air temperature is above 50°C,
to prevent damage from excessive heat, and then
they remain off at lower temperatures.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Edilkamin Firebox Luce Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Edilkamin Firebox Luce Plus in the language / languages: English as an attachment in your email.

The manual is 1.13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Edilkamin Firebox Luce Plus

Edilkamin Firebox Luce Plus Usermanual and installation guide - English - 80 pages

Edilkamin Firebox Luce Plus User Manual - German - 28 pages

Edilkamin Firebox Luce Plus Usermanual and installation guide - German, French, Italian, Portuguese, Spanish - 80 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info