CHECK LIST
Complete this information by reading the entire technical data sheet
Positioning and installing
• The room is well ventilated.
• The smoke flue / the chimney receives the smoke from the stove only.
• The smoke flue has: a maximum of 2 curves, a maximum of 2 metres on the horizontal and at least 1.5 metres vertical length.
• The flue pipes are made of suitable material (we recommend stainless steel).
• If they pass through any inflammable materials (such as wood), all necessary precautions have been taken to avoid fire.
• The volume to be heated has been evaluated suitably, considering the degree of efficiency of the heaters:
how many kW are necessary?
• The plumbing system has been declared to comply with Italian Law DM 37 ex L46/90 or the equivalent in the country of
installation by a technician who is entitled to issue such a declaration.
Usage
• The wood pellets used (6 mm diameter) are of good quality and are not damp.
• The combustion chamber and the ash tray are clean and well positioned.
• The cleaning rods are rattled every day.
• The exchanger pipes and the parts inside the combustion chamber are clean.
• The smoke duct (see page 37) is clean.
• The hydraulic system has been vented.
• The pressure (read on the pressure gauge) is about 1-1,5 bar.
REMEMBER TO VACUUM THE COMBUSTION CHAMBER BEFORE EVERYIGNITION
If the stove does not ignite, do NOT repeat the ignition procedure before emptying the combustion chamber.
ENGLISH
41
sk tecnica charme karma feeling multilingua_FOTOCOP_mod.qxp 03/07/2009 12.25 Pagina 42
