Manual Edilkamin Fata (page 38 of 209) (English, German, Dutch, French, Italian, Polish, Portuguese, Spanish)

810768

Zoom out

Zoom in

1/209

- 38 -

ENGLISH

INSTRUCTIONS FOR USE

Pressed brieﬂ y it switches the stove from manual to automatic operating mode; held down (pressed and held for 2”)

it gives access to the various programming menus.

Each time it is pressed tells the electronic circuit board memory that 15Kg have been loaded into the tank; pressing it

continuously for 5” cancels any residual or previously loaded Kg.

Pressed brieﬂ y it switches the stove’s fan from the quieter “Comfort” level to the higher energy “Turbo” level.

1 2 3 4 5

Loading the feed screw.

Should the pellet hopper empty completely the feed screw

must be ﬁ lled. To do so, keep the + and – keys pressed simul-

taneously for a few seconds (on the remote control or synoptic

panel). Once released, ‘REFILL’ will appear on the display.

This must be carried out before ignition if the stove has stopped

due to the pellets having ﬁ nished.

It is quite normal for some pellet residue to remain inside the

hopper, this is what the feed screw is unable to pick up.

Once a month, fully vacuum the hopper to prevent dusty resi-

due from accumulating.

Automatic ignition

With the stove on standby, press the 0/1 button for 2 seconds

(on the synoptic panel or remote control). This will startup

the ignition process, ‘Start-up’ will appear on the display and

a countdown will commence in seconds (1020). There is no

preset time for the ignition process: its duration will be automa-

tically shortened if the control board detects that certain tests

have been carried out positively. The ﬂ ame appears after about

5 minutes.

Manual ignition

At a temperature lower than 3 °C – too low for the electrical

resistance to become red hot - or if the resistance is temporarily

not working, you can use a ﬁ relighter to ignite the stove.

Insert a well-lit ﬁ relighter into the combustion chamber, close

the door and press 0/1 on the synoptic panel or remote control.

Operating modes

Manual: the user sets the desired operating power (from

a minimum of 1 to a maximum of 5)

Automatic: the user sets the desired room temperature

using the +/- key or the remote control, the stove reads the

setting and adjusts the power to reach the temperature set,

then sets itself to Power 1.

Manual mode from synoptic panel/remote control

With the stove in operation mode or on standby, press and

release the MENU button on the synoptic panel/remote

control and ‘Power’ will appear on the display (showing

the power at which the stove is working). Press the + key on

the remote control to increase the operating power (from Power

1 to Power 5). Setting the fan via the Synoptic Panel

With the stove in operation mode or on standby, rotate the

right knob to adjust the ventilation setting (from 1 to 10 in

all powers).

“Touch in correspondence to the LED points to select the desired operating power.

Alternatively, the traditional setting can be used, which can be selected using the +/- buttons.”

increases the various settings

decreases the various settings; pressing for 5s locks the keypad, pressing for another 5s unlocks the keypad

MIMIC PANEL

hold down for 2 seconds to turn stove on or off

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Edilkamin Fata in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 16 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Edilkamin Fata Manual

Product: