Manual Edilkamin Fata (page 33 of 209) (English, German, Dutch, French, Italian, Polish, Portuguese, Spanish)

810768

Zoom out

Zoom in

1/209

- 33 -

ENGLISH

INSTALLATION

HOT AIR CIRCULATION

In the installation area, the hot air is emitted through the

grill installed in the upper front portion (ﬁ g. E).

To channel the hot air in one or two adjoining rooms, the

stove is equipped with two pipes on the back (ﬁ g.A), to

which special aluminium pipes must be connected.

KIT 11 and KIT 11 BIS optional are available to facilitate

air distribution (see page 34-35-36).

It is essential to remember the importance of proper insulation

on the pipe where the hot air passes to avoid

dispersion. Avoid curves in the pipe as much as possible.

Note: THE PIPES ON THE HOT AIR OUTLETS

MUST BE FITTED BEFORE APPLYING THE

COVERINGS AND PRIOR TO DISASSEMBLY OF

THE UPPER CAST IRON SIDE FLANK. THE

FIRST PART OF THE FLEXIBLE PIPE MUST BE

COMPLETELY “RELAXED” IN SUCH AWAY TO

ELIMINATE CORRUGATION. IN THIS WAY, THE

INTERNAL DIAMETER WILL BE SLIGHTLY

ENLARGED TO FAVOUR ENTRANCE.

Channelled air distribution is adjustable manually by

means of the “L” lever (ﬁ g.D).

To move, remove the “P” locking plates fastened with

screws (ﬁ g. B-C).

Once the plates have been removed, hot air can be directed

either in the upper front panel part ﬁ g. E (lever pulled

all the way back - see ﬁ g. D) or in the rear part ﬁ g. F

(lever pulled all the way forward - see ﬁ g. D) or half in

the upper front panel part and half in the rear part (lever

in the middle - see ﬁ g. D).

Note: IF THE STOVE IS NOT CHANNELLED, THE

PLATES (P) MUST NOT BE REMOVED.

ﬁ g. A

ﬁ g. F

ﬁ g. B

ﬁ g. E

ﬁ g. C

ﬁ g. D

hot air outlet pipes

front

middle

rear

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Edilkamin Fata in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 16 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Edilkamin Fata Manual

Product: