810768

Edilkamin Fata Manual

30
Zoom out
Zoom in
Previous page
1/209
Next page
- 30 -
ENGLISH
COVERING INSTALLATION FATA/SIRENA
62
62
130
33
75
75
62
62
130
139
138
139
138
150
150
150
150
150
150
62
62
24
vite
Part. “Z”
fi g. 1
fi g. 11
fi g. 4
fi g. 2
fi g. 3
61
150
150
150 150
150
150
61
61
61
fi g. 8 fi g. 9
fi g. 10
61
62
4
62
138-139
29
24
bushings
screw
DETAIL. Z
INCLUDED HARDWARE:
2 M6x25 screws
2 M6x12 screws
4 silicone spacers for ceramic top
8 fl at washers diam. 6
2 bushings
16 silicone spacers for ceramics
2 ceramic fi xing plates
ASSEMBLING THE LATERAL TILES (fi g. 1-2)
• Remove the rear panel (33) “And the two profi les (75).
• Fix the two plates (29) to the zinc-plated sides.”
“for the FATA model (Illustr. 3-4)
• The left-hand plate must be fi xed to the central and upper
holes, whilst the right-hand plate must be fi xed to the central
and lower holes.
• Fit the ceramic tiles (138-139) on to the plates (29)
• Place 2 silicone-coated spacers (150) in the lower part betwe-
en the cast iron base and the lower, right-hand tile (139) (see
detail Y - Illustr. 4).
• For correct fastening of the upper right side ceramic tile and
the lower left side ceramic tile use the stop adjustment screws
located on the zinc-plated sides of the structure (Illustr. 5-6)
• Right-hand side (Illustr. 5): adjust the fi xing screw abutted
against the upper right side ceramic tile (138).
• Left-hand side (Illustr. 6): remove the upper left ceramic tile
(139) and adjust the fi xing screw abutted against the lower left
side ceramic tile (138).
• Replace the upper left ceramic tile (139).
for the SIRENA model (Illustr. 8-9)
• Both plates must be fi xed to the central and lower holes.
• Fit the ceramic tiles (61) on to the plates (29)”
NOTE: Being made through a process of casting,the tiles may
differ slightly in height. To compensate for any height varia-
tions, silicone spacers may be inserted (150 - fi g. 4-9) without
affecting the aesthetic appearance of the stove.
• Replace the profi les (75) Replace the rear panel (33).
ASSEMBLING THE UPPER FRONT PANEL FATA/SI-
RENA (fi g. 10-11)
• Position the ceramic upper front panel (62) so that it rests
against the front panel support (24) positioned above the door.
• Use an Allen key to fasten the front panel in place using
the 2 supplied M6x25 screws (the door must be opened before
performing this operation).
NOTE: For correct assembly of the upper front panel (62), pla-
ce the bushing supplied between the same and the front panel
(24), as shown in detail “Z” in Illustr. 11.
ASSEMBLING THE LOWER FRONT PANEL FATA/
SIRENA (fi g. 10-12)
• Use the supplied Allen key to loosen the screws that hold
the cast iron lower front grill (4) in place and remove it.
• Position the front panel (62) and use an Allen key to
fasten it in place using the 2 supplied M6x25 screws as indica-
ted in detail “X” (fi g. 12).
detail. “Y”
fi g. 7
fi g. 5
fi g. 6
29
29
… 30 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Edilkamin Fata at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Edilkamin Fata in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info