810845
6
Zoom out
Zoom in
Previous page
1/32
Next page
The appliance can be identified by means of:
- the packaging label
showing the name of the product, the code, the serial
number and the type of gas that can be used.
- The Technical Plate
showing the serial number, the model and the main
technical-performance data.
- The gas type plate
Showing the name of the gas for which the appliance
has been set and regulated. If the type of gas is
changed, this plate must be replaced with that of the
new gas!
Spare parts and/or technical jobs require the
exact identification of the associated model
of appliance.
Tampering with, removing or the absence of the
Technical Plate, etc. does not allow the exact
identification of the product, making any installa-
tion and maintenance job difficult.
Independent gas appliances for heating environ-
ments. They feature an atmospheric burner with
combustion chamber TYPE C11 and C31, sealed
with respect to the installation premises, utmost gua-
rantee of safety because no exhaust or fuel fumes
enter the premises.
The suction of the combustion air and discharge of com-
bustion products occurs outside the installation premises.
In view of their small size, they can be installed in
very compact spaces and ensure a greater well-
being of the heated environment.
The natural convective movement permits quick hea-
ting of the environments from when the appliance is
switched on. This type of appliance can of course be
channelled for better heat distribution.
An electronic board controls all the main functions of
the appliance and automatically interrupts the gas
supply in case of a fault.
The control panel features: appliance On/Off supply,
manual or automatic start/stop, daily Timer program-
ming, heat output setting, room temperature setting
and operating condition reset after a fault.
The fume inlet and exhaust pipes including the
wall terminal (type C11) or roof terminal (type
C31), the bends, pipes, coaxial connector and
other accessories, all Listed by the manufacturer
(see INSTALLATION chapter).
The appliances are factory set, to operate
with Natural Gas, but are also available for
LPG (G30/G31). This type of appliance can be
transformed from Natural Gas to LPG and vice
versa with replacing the burner. The gas type
and pressure used for operation are shown on
the technical data plate affixed to the appliance.
Do not change the factory settings of the gas
control unit or receiver before installation. The
burner and pilot light are factory set by the
Manufacturer. The fireplace must be connected
to the gas type shown on the burner. Never ever
connect a Natural Gas burner to the LPG supply
or vice versa.
6GENERAL
DESCRIPTION OF THE APPLIANCE
IDENTIFICATION
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Edilkamin EK130 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Edilkamin EK130 in the language / languages: English as an attachment in your email.

The manual is 12.82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Edilkamin EK130

Edilkamin EK130 Usermanual and installation guide - German - 34 pages

Edilkamin EK130 Usermanual and installation guide - French - 34 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info