810764
10
Zoom out
Zoom in
Previous page
1/28
Next page
- 10 -
ENGLISH
INSTALLATION
FLUE
• Before positioning the stove, make sure the ue is suitable
for the smoke produced.
• When installing the stove, the position of the ue must
be taken into account in order to prevent incorrect smoke
duct paths; the size of the ue must comply with the specica-
tions indicated in the technical data.
We recommend using insulated circular section ues made of
stainless steel with smooth internal walls.
The ue cross-section should be constant for its whole
length (we recommend a minimum height of 3.5 - 4 m).
• We recommend tting a chamber at the base of the ue
to collect solid material and any condensate. Dilapidated
ues and ues made of unsuitable materials (asbestos,
galvanized steel, corrugated iron, etc.) with rough or
porous internal surfaces are illegal and detrimental to
stove operation.
• The ue should be used for one single stove only (it
cannot receive the outlet of other reboxes)
• For a good draught, the ue should be free from
obstructions, such as bottlenecks, horizontal sections and
sharp edges; any nonvertical sections should slope by not
more than 45° from the vertical (g. 3).
• If the ue to be used has previously been used for other
stoves or replaces, it must be carefully cleaned to prevent
faulty operation and avert the risk of unburnt deposits
on the internal ue walls catching re.
• In normal working conditions, the ue must be cleaned
at least once a year.
• For optimal operation, the ue draught must create a
pressure drop between 0.12 and 0.2 mbars. Lower values
may lead to unpleasant smoke emissions when loading
the stove and produce excessive soot deposits; higher
values would lead to excessively fast combustion and a
decrease in thermal efciency. To fall within the correct
values, refer to the UNI Standard 10683 table.
• If there are several ues on the roof, the others should
be at least 2 metres away and the stove chimney pot
should be at least 40 cm higher than the others.
Please refer to the chapter of the UNI 10683 regulation
regarding positioning of chimney pots.
• We recommend installing a re damper on the smoke
duct.
SMOKE DUCT
The smoke duct connects the smoke outlet to the ue inlet.
The smoke duct must be made with steel or ceramic rigid
pipes.
Flexible metal pipes or bre-cement pipes are not allowed.
Horizontal and counterslope sections should be avoided.
Any cross-secion change should be made in correspondence of
the stove outlet and not at the ue inlet.
Angles greater than 45° are not allowed (see gures 1,2,3,4).
The connection between the smoke duct and the steel ue
should be sealed with high temperature resistant mastic.
CHIMNEY POT
The chimney pot must have a wind guard (for any clarication,
please refer to your retailer), an internal section
equivalent to that of the ue, and smoke outlet cross-section
at least twice that of the internal ue cross-section.
For correct operation, please refer to UNI 10683.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Edilkamin Demy at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Edilkamin Demy in the language / languages: English as an attachment in your email.

The manual is 5.18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Edilkamin Demy

Edilkamin Demy Usermanual and installation guide - German - 28 pages

Edilkamin Demy Usermanual and installation guide - Dutch - 28 pages

Edilkamin Demy Usermanual and installation guide - French, Italian - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info