810723

Edilkamin Cristal 76 Manual

15
Zoom out
Zoom in
Previous page
1/72
Next page
ENGLISH
15
THE TECHNOLOGY
Fuelling air
CRISTAL fuelling air can only be mounted in rooms where there is sufficient air power supply
for fuelling. To have the chimney function correctly, it is essential that the fuelling air reaches
the hearth through a fine pipe on the appropriate inlets, provided at the sides and rear of
the chimney. A 12.5 cm fitting (A) is supplied, which is to be applied to the inlet to be used
(fig. 6).
The connection with the outside must have a useful passage section of at least 125 cm2
along its whole path. The mouths not used for connecting the fuelling air passage flexible
pipe, must remain closed with a lid.
Whenever the air volume results scarce and the type of building in which the chimney is
installed particularly air sealed, it will be necessary to install a supplementary air inlet of 120
cm2 (ø 12.5 cm).
Butterfl y valve
The fuelling air must flow to the hearth regulated by a butterfly valve.
The butterfly valve is delivered as an accessory together with a flexible pipe and the fixing
bands.
Unless the butterfly valve is mounted in a fixed and solid manner, the compact chimney
cannot be started.
Mount the fuelling air regulating lever in the most adequate position under the threshold.
Regulating the butterfl y valve
“Starting” position / max. heating power (fi g.7):
air valve regulating lever totally extracted. Starting with cold chimney and max. hearth
power.
“Maintain fi re” position (fi g.8):
regulating lever for the inlet valve. All air mouths are closed.
fig. 6
fig. 7
fig. 8
A
The air for heating
natural convection
Room temperature enters from the side inlets (n 13 - fig.1 on page 13) located on the base of the shell. It warms up and moves along the
hollow and comes out hot from the outlets on the cover of the shell itself.
In this mode, the covers of the air inlets on the shell must be removed (n 13 - fig.1 on page 13) and equivalent air passages must be
provided for on the coverings in such a way that the air to be heated have easy access to the said inlets.
forced ventilation
forced hot air circulation is obtained by means of application of a special kit (fig.9)
this kit is composed of a metal box (69), complete with:
- 800 m³/h fan (72)
- regulator (73)
- sensor (74)
- fitting (70) connecting to the external air inlet with smoke damper and wired control (4)
- two-way fitting (71) for conveying external air to the shell
the air box is positioned next to the fireplace, either on the right or left side.
Detailed information for forced ventilation kit installation is contained in its packaging.
fig. 9
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Edilkamin Cristal 76 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Edilkamin Cristal 76 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 2.49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info