810755
43
Zoom out
Zoom in
Previous page
1/56
Next page
43
ENGLISH
USER INSTRUCTIONS
Fans/ducting
The stove is equipped with three fans, which can be
regulated for speed separately.
They are indicated as fan 1, 2 and 3 and their situation
is shown at the bottom of the remote control display.
Fan 1 always blows air frontally
Fans 2 and 3 can blow air frontally or towards the
ducting.
Setting the Fan
Follow the instructions below to manually regulate the
power levels of fans 1, 2 and 3.
Press “OK” once.
The fan setting is shown on the display, next to the
blade symbol representing the fan.
Set the fan level using the “+” and “-” buttons.
The “blades” fill in to indicate the current setting.
Confirm by pressing the “OK” button for 2 seconds.
First adjust fan 1 and then fan 2.
Fan setting 1 can also follow the power.
To activate this mode, press the + button to above the
maximum fan setting. Letter “A” will appear next to the
“blades” symbol.
Speed 5 of Fan 1 corresponds to “turbo” speed for
“urgent” ducting requirements.
Fan settings 2 and 3 can be increased or decreased
or turned off (fan setting 1) using the +/- buttons as
described above or can follow the power demand
(decrease when the power is decreased or increase
vice versa).
To activate this mode, press the + button to above
the maximum setting. Letter “A” will appear next to the
“blades” symbol.
To ensure that the speed of fans 2 and 3 varies
according to the room temperature demand, contact
the Edilkamin technician, who will be able to fit
dedicated sensors.
THE NUMBER NEXT TO THE “BLADE” OR “FLAME”
ONLY DISPLAYS WHILE THE SETTING IS BEING
MADE.
position 1
“flame”
symbol
“blade”
symbol
Levers
USER
23
Bear in mind lever length when placing
ducting pipe, especially if directed
upwards by a bend:
The lever fully pulled in front air position
has in fact a length of 6,5 cm. (1,5 cm. in
ducting position)
The direction of fans 2 and 3 can be regulated using
the levers on the back of the stove: each lever regulates
the direction of the fan on the same side.
Lever backwards =
Air blows frontally, not to the ducting
Example
Fan 2 providing frontal air
Fan 3 ducting warm air
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Edilkamin Cherie Up at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Edilkamin Cherie Up in the language / languages: English as an attachment in your email.

The manual is 17.72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Edilkamin Cherie Up

Edilkamin Cherie Up Usermanual and installation guide - German - 56 pages

Edilkamin Cherie Up Usermanual and installation guide - Dutch - 56 pages

Edilkamin Cherie Up Usermanual and installation guide - French, Italian - 100 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info