810905
48
Zoom out
Zoom in
Previous page
1/60
Next page
48
ENGLISH
USER
INSTRUCTIONS FOR USE
Should this correction not suffice, contact
the Edilkamin-authorised Dealer, to establish
the new operating axis.
Notes on flame variability:
A
ny changes in the
state of the flame depend on the type of pellets used,
as well as on normal variation of solid fuel flames and
on the periodic cleaning of the crucible the boiler-stove
automatically carries out
(Note: This does NOT replace the necessity cold
vacuuming by the user prior to start up)
.
Environmental temperature control
this comfortable and simple adjustment feature, as
standard in this line of products, allows you to manage
the stove power based on the environmental temperature.
After activating the “Comfort Clima” function from the
parameters menu (ask the technical assistance centre -
TAC), press the SET button briefly a couple of times to
switch from classic “Modulate_Power” mode to “Comfort
Clima” mode; then select the desired mode from the
display.
Modulate power mode
the stove modulates its power by following the output
temperature set by the user.
Comfort Clima mode
the stove modulates its power by following the output
temperature set by the user. You can also use the remote
control as a room thermostat: on reaching the set
temperature the stove will go to minimum power.
Setting the environmental temperature
In “Comfort Clima” mode, by pressing the +/- buttons
on the synoptic panel or on the remote control, you can
set the display to the desired environmental temperature.
-At environmental temperatures below the set
temperature, the stove modulates power normally to
reach the set output.
-With environmental temperature reached (+2°C), the
stove goes to minimum power.
The environmental temperature is transmitted from the
remote control; the remote control transmitter must be
visually aligned with the receiver of the synoptic panel
If the remote control is incorrectly positioned, it cannot
send its recorded temperature. The stove therefore
independently decides to operate at minimum power
and continues thus until the connection with the remote
is restored
Temperature control with external thermostat
another temperature control system is available as an
alternative to the remote control. You can in fact connect
the thermostat serial port to your home thermostat or any
(clean output contact) easily available one
The stove will automatically recognise the connection with
the thermostat serial port under the following conditions:
With environmental temperature lower than the thermostat
setting (contact closed), the stove modulates power
normally to reach the set temperature
-With environmental temperature reached by the
thermostat (contact open), the stove goes to minimum
power
Configuration
Temperature
provided by
the remote
control
Temperature
provided by
external
environmental
thermostat
No adjustment
(factory set-
ting)
"Comfort
Clima"
parameter
ON ON ON
“SONDA IR”
parameter ON OFF ON
Connection to
serial port
NO
no connection
Yes
with blue
serial cable
NO
no connection
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Edilkamin Cherie Up H at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Edilkamin Cherie Up H in the language / languages: English as an attachment in your email.

The manual is 7.15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Edilkamin Cherie Up H

Edilkamin Cherie Up H Usermanual and installation guide - German - 60 pages

Edilkamin Cherie Up H Usermanual and installation guide - Dutch - 60 pages

Edilkamin Cherie Up H Usermanual and installation guide - French, Italian - 104 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info