810747
32
Zoom out
Zoom in
Previous page
1/44
Next page
32
ENGLISH
USER
USER CONTROLS (REMOTE CONTROL)
- ON/OFF
- Switch-on/switch-off
- Manual mode setting
Power setting
Fan setting
- Automatic mode setting
Temperature setpoint setting
Fan setting
- RELAX function
- From the Menu page:
Load Pellets (SCREW LOAD)
Stand By
Crono-Program
Night
Date / time
Display
Language
Beep (BUZZER)
Info (technician only)
Technical menu (technician only)
We describe the procedures below.
ON/OFF
hold the ON/OFF button down to turn the product ON.
When ON, the product has a flame (ignition phase,
etc.) when there is a heating demand.
Switch-on/Switch-off
The ON/OFF button switches the product on (starts
the ignition phase) or off (starts the switch off phase)
manually in Manual mode only.
In Automatic mode, the product responds to the
heating demand.
Setting Manual/Automatic
Press the OK button for 2 seconds to switch from
manual to automatic or vice versa.
In Manual mode, the display reads “Man”
In Automatic mode, the temperature displays.
In automatic- Room Temperature Setting
Set Room Temperature (read by the remote control,
this should be be positioned in the room the product
is installed in)
Set the temperature setpoint (Set) with the “+” and “-“
buttons.
In manual- Power setting
Set the power level (displayed by the flame symbol)
with the “+” and “-“ buttons.
The power level displays next to the flame symbol.
USER INSTRUCTIONS
Ventilation
The product is equipped with two fans, defined in the
control logic as fan 1 and 2, and displayed as positions
1 and 2 (see below).
The two fans can be adjusted separately. First adjust
fan 1 and then fan 2, as described below.
Ventilation setting
Follow the instructions below to manually regulate the
power levels of fans 1, 2 and 3 (optional).
Press “OK” once
The fan setting displays, next to the blade symbol
representing the fan.
Set the fan level with the “+” and “-“ buttons.
The blades fill in to indicate the current setting.
Confirm by pressing the “OK” button for 2 seconds.
Fan setting 1 can also follow the room temperature
demand (reduce when the temperature is close to the
desired temperature or increase vice versa).
To activate this mode, press the + button to above the
maximum fan setting. The letter “A” will appear next to
the blade symbol.
Fan settings 2 and 3 (optional) can be increased or
decreased using the +/- buttons as described above
or follow the power demand (decrease when the power
is decreased or increase vice versa).
To activate this mode, press the + button to above the
maximum setting. The letter “A” will appear next to the
blade symbol.
To ensure that the speed of fans 2 and 3 varies
according to room temperature demand, contact CAT,
who will be able to fit dedicated sensors.
THE NUMBER NEXT TO THE FAN BLADE OR FLAME
ONLY DISPLAYS WHILE THE SETTING IS BEING
MADE.
position 1
“flame”
symbol
“blade”
symbol
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Edilkamin Blade at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Edilkamin Blade in the language / languages: English as an attachment in your email.

The manual is 13.54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Edilkamin Blade

Edilkamin Blade Usermanual and installation guide - German - 45 pages

Edilkamin Blade Usermanual and installation guide - Dutch - 44 pages

Edilkamin Blade Usermanual and installation guide - French, Italian - 88 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info