810882

Edilkamin ATLANTA Manual

43
Zoom out
Zoom in
Previous page
1/158
Next page
ENGLISH
42
Mimic panel
to turn on and off (hold down for 2") and to exit from the menu during programming
to access the menu during programming
to increase the various settings
to decrease the various settings
(pellet loading/reserve button)
press once to ‘inform’ the thermo-stoves memory that a 15 kg sack of pellets has been loaded, thereby allowing it to
keep track of the reserve.
(boiler setting button)
this button together with the +/- keys controls a secondary circuit, e.g. that of a boiler.
The right side of the display shows the temperature of any external storage tank/boiler (if the boiler sensor is connec-
ted). Press the ‘boiler’ button to see the set value. If the boiler sensor is not connected, dashes will appear instead of the
temperature (--- °C).
INSTRUCTIONS FOR USE
Left display Right display
Boiler
Pellet load/reserve
Remote control receiver
1st ignition
The first start up must, without fail, be performed by DEALER.
You must consult the DEALER in your area when igniting the stove for the first time, in order for the thermo-stoves to be calibrated
according to the type of pellets and installation conditions
The DEALER must also:
-Verify that the hydraulic system is correctly installed and is equipped with an expansion tank that is sufficiently large to guarantee
safety. The presence of a tank within the thermo-stoves does NOT guarantee appropriate protection from thermal expansion
occurring in the whole system.
-Connect the electrical power to the thermo-stoves and implement a cold test (to be carried out by the DEALER).
-Fill the system using the filling tap (it is recommended not to exceed a pressure of 1bar).
When filling, ‘bleed’ the pump and the relief tap.
Warning:
During the initial start up phase, use the manual valves (V1-V2-V3)
beneath the cast iron cover to perform the air/water purging operation.
This operation must also be repeated during the first days of use and
whenever the system is reloaded, even partially. The presence of air within
the pipelines can hinder the unit's proper functionality. Rubber tubes are
supplied with valves V1 and V2 to facilitate relief operations.
First ignitions.
There may be a slight smell of paint the first few times it is ignited, however, this will disappear quickly.
Before igniting you must check:
• that installation is correct / • the power supply/ • that the door closes properly to a perfect seal
• that the combustion chamber is clean/ • that the display is on stand-by (time and temperature set).
V2 V1 V3
… 43 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Edilkamin ATLANTA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Edilkamin ATLANTA in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 4.03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info