727491
19
Zoom out
Zoom in
Previous page
1/23
Next page
Portable Air Conditioner 16
Troubleshooting
Follow the troubleshooting guide below to resolve common issues.
Issue Possible Cause Solution
My air conditioner is
not functioning at all
Unit is not receiving
power
Make sure the unit is
plugged in
LCDI power cord is
tripped
Press the Reset button
on the LCDI cord
Insufficient power Move the unit to
another outlet. Check
your circuit breaker.
(Refer to the rating
label on the back of
the unit to determine
the Amperage draw)
Water reservoir is full
and P1 error code
appears on the control
panel
Drain the unit and
restart
Control panel is
disconnected
If no indicator lights
turn on, contact
customer service
My remote control
does not work and the
indicator light on
remote does not turn
on
Batteries not installed Install new batteries
Bad batteries Replace the batteries
Batteries installed
incorrectly
Reinstall the batteries
correctly
A defective remote
control
Contact customer
service
My air conditioner is
making a loud noise
The unit is not level. Make sure the unit is
on a level surface
A foreign object has
jammed the fan.
Remove the object
from the fan
The floor below the
unit is uneven
Move the unit to a
level surface
My air conditioner is
making a continuous
metallic knocking or
pinging sound
Unit may have been
shipped on its side
Shut off the unit. Let
the unit sit on a level
surface for at least 24
hours and restart.
Damaged compressor Contact customer
service
My air conditioner is
leaking
Drain plug is removed Attach the drain plug
Cracked base pan Contact customer
service
My air conditioner runs
for a little while and
then it trips the power
cord or the circuit
breaker
The air conditioner
may be plugged into
an outlet that can not
supply the correct
amount of current
Contact an electrician
if the unit works in a
different room or circuit
The control panel
lights blink randomly
Unit may have a faulty
control panel
Contact customer
service
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Edgestar PAC1201W at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Edgestar PAC1201W in the language / languages: English as an attachment in your email.

The manual is 0,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info