727491
14
Zoom out
Zoom in
Previous page
1/23
Next page
11
Operating the Control Panel
Use the Power button to turn the portable air conditioner on and off.
Auto-Restart: If power to the unit is interrupted, the air conditioner will restart
itself in its last used mode/settings once power is restored. The compressor will
restart after 3 minutes.
Cooling mode cools and dehumidifies the air. If the ambient temperature drops
below the temperature you selected, the compressor turns off and the unit
functions with the fan only. When the temperature rises above the temperature
you selected, the compressor turns on again.
Whether your desired temperature can actually be reached depends on the
ambient conditions. The room temperature remaining above the set temperature
is normal.
To operate the unit in cooling mode:
1) Make sure the power cord is plugged into a power outlet.
2) Press the Power button.
3) Press the Mode button until the LED indicator next to “Cool” lights up.
4) Select the fan speed by using the Fan button.
5) Set the thermostat by using the Up and Down buttons. The thermostat is
adjustable between 62°F - 88°F in two degree increments.
During the Dehumidifying mode, the unit will condense water out of the air and
accumulate the water in the reservoir. In this mode, you will not be able to select
a different fan speed or adjust the temperature. The fan motor operates at Low
speed.
To operate the unit in dehumidifying mode:
1) Make sure the power cord is plugged into a power outlet.
2) Remove the exhaust hose from the back of the unit.
3) Press the Power button.
4) Press the Mode button until the LED indicator next to “Dry” lights up.
When the portable air conditioner is set to auto mode, it will automatically select
cooling or fan only operation depending on what temperature you have selected
and what the room temperature is near the unit. You cannot change the fan
speed.
To operate the unit in Auto mode:
1. Make sure the unit is powered on. Press the Mode button until the LED
indicator next to “Auto” lights up.
Fan Only mode is used to circulate the air in your room. No temperature
setting is needed.
To operate the unit in Fan Only mode:
1) Plug in the unit to a power outlet and press the Power Button.
2) Press the Mode button until the LED indicator next to “Fan” lights up.
3) Press the Fan button to select the fan speed. You can choose between
High, Medium and Low. The LED indicator next to the speed will light up.
Power
Cooling Mode
Dehumidifying Mode
Automatic Mode
Fan Only Mode
NOTE: The exhaust hose
must be used in Cooling
mode in order to cool a room.
NOTES: While in Dehumidifying mode, you must manually drain the water from the unit. Additionally, the
ambient temperature in the room will probably rise by a few degrees. You will not be able to change the
thermostat temperature while in Dehumidifying Mode. Keep windows and doors closed for the best
dehumidification performance.
NOTE: Fan Only mode
requires that the exhaust
hose be removed.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Edgestar PAC1201W at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Edgestar PAC1201W in the language / languages: English as an attachment in your email.

The manual is 0,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info