663879

EdgeCraft Chef-s Choice 316 Manual

10
Zoom out
Zoom in
Previous page
1/12
Next page
10
3. european/amerICan bladeS
While most of the Euro/American knives (shown on the left)
have a thicker cross-section designed for heavier work, the
range of blade thickness in these familiar blades is great
and certain of these knives, such as the conventional paring,
fillet and utility blades, have a relatively thin cross-section
well suited to their intended application. Euro/American
blades are universally double beveled (sharpened on both
sides of the blade.)
SuggeStIonS
1. Always clean all food, fat and foreign materials from knife before sharpening or resharpen-
ing. If soiled, carefully wash the blade before sharpening. (See suggestion #6).
2. Use only light downward pressure when sharpening – just enough to establish secure
contact with the abrasive disk.
3. Always pull the blades at the recommended speed and at a constant rate over length of
blade. Never interrupt or stop the motion of the blade when in contact with abrasive disks.
4. Carefully follow the detailed procedures for each type blade for best results and to extend
the useful life of your knives. The sharpening sequence is especially important with the
single sided traditional blades.
Figure 9. Cross-section of a typical factory traditional
Asian knife edge, magnified 50x (right-handed).
Figure 11. Removing cover under base to clean out
metal dust.
Figure 10. Cleaning the polishing disks.
Retaining
Pins
Q-tip
Knife
Holding
Spring
… 10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for EdgeCraft Chef-s Choice 316 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of EdgeCraft Chef-s Choice 316 in the language / languages: English as an attachment in your email.

The manual is 0,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info