663881

EdgeCraft Chef-s Choice 312 Manual

7
Zoom out
Zoom in
Previous page
1/12
Next page
Figure 4. Inserting blade in right slot of Stage 1.
Figure 5. Develop a distinct burr along knife edge before
honing in stage 2. Burr can be detected by sliding finger
across and away from the edge. Caution! See text.
Next, repeat with one full length pull in the right slot of Stage 1. (See Figure 4)
Note: Each time you insert the blade, simultaneously pull the blade toward you. Never push the
blade away from you. Apply just enough downward pressure to make contact with the disk –
added pressure does not speed up the sharpening process.
To insure uniform sharpening along the entire blade length, insert the blade near its bolster or
handle and pull it at a steady rate until it exits the slot. Always make an equal number of pulls
alternating one pull in the left slot and then one pull in the right slot in order to keep the edge
facets symmetrical. Generally in Stage 1 you will find that only 3 to 5 pairs of slow pulls is ad-
equate, but for a duller knife more pulls will be needed.
Before moving to Stage 2 it is very important to confirm that a burr (see Figure 5) exists along
one side of the edge. To check for the burr, move your forefinger carefully across the edge as
shown. (Do not move your finger along the edge – to avoid cutting your finger). If the last pull
was in the right slot, the burr will appear only on the right side of the blade (as you hold it when
sharpening) and vice versa. The burr, when present, feels like a rough and bent extension of the
edge; the opposite side of the edge feels very smooth by comparison.
If no burr exists, make one or two pairs of additional alternating pulls in the left and right slots of
Stage 1 before proceeding to Stage 2. Slower pulls will help you develop the burr. Confirm the
presence of the burr after a pull in the left slot and then also after a pull through the right slot
before proceeding to Stage 2. It is always necessary to create the burr in Stage 1 before
honing in Stage 2.
7
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for EdgeCraft Chef-s Choice 312 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of EdgeCraft Chef-s Choice 312 in the language / languages: English as an attachment in your email.

The manual is 0,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info