663872

EdgeCraft Chef-s Choice 110 Manual

4
Zoom out
Zoom in
Previous page
1/8
Next page
4
GETTING TO KNOW YOUR SHARPENER
Before using your sharpener you may wish to become familiar with its features. Do not plug the
sharpener cord into the an outlet. (Refer to Figures 1 and 2).
1. Place the heel area of a knife blade in one of the sharpening slots of Stage 2 or 3 (Figure
3). Loosen your grip. You will notice that the knife will be pulled to the side of the slot and
down into the slot by a magnet. Feel the pull of the magnet.
2. Now, while holding the knife with a secure yet relatively loose grip as shown in Figure 4,
pull the knife towards you while allowing the knife blade to be pulled against the magnet.
Let the magnet establish the blade angle. Except when sharpening the tip, keep the knife
blade level with the table. Grip as shown in Figure 4. You now have a feel for how the
magnets operate and are ready to proceed to the following instructions.
Place the Chef’sChoice
®
on a stable surface. Plug the sharpener cord into an appropriate electri-
cal outlet. (Voltage rating is indicated on label.) Press the switch to “ON.”
TO SHARPEN A KNIFE FOR THE FIRST TIME
Stage 1: Hold knife with the illustrated grip below (Figure 4). Place the heel area of the knife
blade in the left PRE-SHARPENING slot, Stage 1. Let the knife rest against the magnet on the
Figure 3. Magnets control the blade angle.Figure 2. Typical kitchen knife.
Heel
Bolster
Handle
Edge
Tip
Figure 1. Chef’sChoice
®
Professional Model 110.
Stage 1 Pre-sharpening
(Diamond disk)
Pre-sharpening slots
Left
Left Left
Right
Right Right
Sharpening slots Honing slots
On/Off
Switch
Stage 2 Sharpening
(Orbiting Diamonds
®
)
Clean out plug
Cover for
pre-sharpening
slots
Stage 3 Honing
(Orbiting Diamonds
®
)
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for EdgeCraft Chef-s Choice 110 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of EdgeCraft Chef-s Choice 110 in the language / languages: English as an attachment in your email.

The manual is 0,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info