48273
46
Zoom out
Zoom in
Previous page
1/98
Next page
40
Using BIOS
Onboard 1394 Device (Enabled)
Enable this item if you plan to use the 1394 device.
Onboard LAN Device (Enabled)
Use this item to enable and disable the onboard LAN function.
Onboard LAN Boot ROM (Disabled)
Use this item to enable or disable the booting from the onboard LAN or a network add-in
card with a remote boot ROM installed.
IDE HDD Block Mode (Enabled)
Enable this field if your IDE hard drive supports block mode. Block mode enables BIOS to
automatically detect the optimal number of block read and writes per sector that the drive
can support. It also improves the speed of access to IDE devices.
Power Management Setup
This option lets you control system power management. The system has various power-
saving modes including powering down the hard disk, turning off the video, suspending
to RAM, and software power down that allows the system to be automatically resumed
by certain events.
ACPI Suspend Type (S3(STR))
Use this item to define how your system suspends. In the default, S3 (STR), the suspend
mode is suspend to RAM, i.e., the system shuts down with the exception of a refresh current
to the system memory.
Suspend Mode (Disabled)
The CPU clock will be stopped and the video signal will be suspended if no Power Manage-
ment events occur for a specified length of time. Full power function will return when a
Power Management event is detected.
Video Off Option (Susp, Stby —> Off)
This option defines if the video is powered down when the system is put into suspend mode.
Video Off Method (DPMS Supported)
This item defines how the video is powered down to save power. This item is set to DPMS (Display
Power Management Software) by default.
ACPI Suspend Type [S3(STR)]
Suspend Mode [Disabled]
Video Off Option [Susp, Stby -> Off]
Video Off Method [DPMS Supported]
MODEM Use IRQ [Auto]
HDD Off After [Disabled]
Power Button Override [Instant Off]
Power On After Power Fail [Off]
PM Wake Up Events [Press Enter]
Item Help
Menu Level
Phoenix-AwardBIOS CMOS Setup Utility
Power Management Setup

F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ECS Elitegroup 649-M2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ECS Elitegroup 649-M2 in the language / languages: English, German, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 2,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info