48273
8
Zoom out
Zoom in
Previous page
1/98
Next page
2
Introducing the Motherboard
Feature
The SiS649 Northbridge (NB) and SiS965 Southbridge (SB) chipset are based on an
innovative and scalable architecture with proven reliability and performance.
SiS649
(NB)
Supports 12 Outstanding Transactions and Quasi-Synchro-
nous Host to DRAM timing
Accommodates High Throughput SiS MuTIOL connecting to
SiS965 MuTIOL media I/O with bi-directional 16-bit data bus
to perform 1GB/s bandwidth in 133 MHz x 4 mode
Supports PCI-Express X16 Graphic Port
Supports DDR400/333/266 or DDR2-533/400 SDRAM
Supports up to 2 unbuffered DDR2-533 DIMMs or 2 unbuf-
fered DDR400 DIMMs up to 2 GB
“Hyper-Threading” technology enables the operating system into thinking it’s hooked
up to two processors, allowing two threads to be run in parallel, both on separate
“logical” processors within the same physical processor.
SiS965/965L
(SB)
Supports DDR up to 400/333/266 MHz SDRAM memory module
Accommodates two DDR 184-pin un-buffered DIMM sockets
Each slot supports up to 1GB with a total maximum capacity of 2GB
Memory
Processor
Chipset
Concurrent servicing of all DMA Devices: Dual IDE Control-
lers, SATA controller, three USB 1.1 host controllers and
one USB 2.0 host controller, LAN MAC Controller and Au-
dio/Modem DMA Controller
Integrated MuTIOL 1G to PCI Express x1 Bridge, compliant
with PCI Express 1.0a
Compliant with PCI 2.3 specificaiton
Compliant with Serial ATA 1.0 specification, supports up to
four independent ports (SiS965 only)
Compliant with AC’97 v2.3 supporting 8 Channels of audio
outputs and V.90 HSP-Modem
Integrated USB 2.0/1.1 Controller sopporting up to eight
USB ports
Expansion Options
The motherboard uses a LGA775 socket that has the following features:
Accommodates Intel P4/Celeron Processors
Supports a system bus of 800/533MHz
Supports Dual Core CPU
Supports “Hyper-Threading” technology CPU
1394a FireWire (optional)
Compliant Single Chip PCI Host Controller for IEEE1394-1995 Release 1.0
and IEEE 1394a-2000
Provides two 1394a fully compliant cable ports at 100/200/400 Mbit per
second
The motherboard comes with the following expansion options.
One PCI Express x16 slot
Three 32-bit PCI slots
Two IDE connectors which support four IDE channels
A floppy disk drive interface
The motherboard supports UltraDMA bus mastering with transfer rates of 133/100
66MB/s
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ECS Elitegroup 649-M2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ECS Elitegroup 649-M2 in the language / languages: English, German, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 2,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info