Manual Ecovacs Winbot 7 series - W730 (page 12 of 19) (English)

668035

Zoom out

Zoom in

1/19

3. Operating the Robot

Press the START/PAUSE Button on WINBOT 7

or on the Remote Control to begin cleaning.

Place WINBOT 7 on the window at least 10cm

(4’’) from the corners and other obstacles and

press it

on the window. WINBOT 7 has

successfully attached to the window when the

Status Indicator Light BLUE.

WINBOT 7’s Back-Up Battery must be fully charged

before use. Plug WINBOT 7 in, move the Power

Switch to the CHARGE position until the Status

Indicator Light glows a continuous GREEN.

Please be careful not to pull the Air Release

Trigger.

Please ensure there is a 15cm (5.9”) clearance

between the glass and obstacles in the room like

curtains or furniture.

Move the Power Switch to the “ON” position.

WINBOT 7 is powered ON when it generates

suction.

3.7 Start

Plug in WINBOT 7

Power ON

Place on the Glass

Start

Bonjour
Après une mise en charge de la batterie pendant plusieurs heures le voyant vert ne cesse de clignoter .
Faut il changer la batterie ? Submitted on 14-1-2022 at 10:54
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ecovacs Winbot 7 series - W730 in the language / languages: English as an attachment in your email.

The manual is 1,76 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ecovacs Winbot 7 series - W730

Ecovacs Winbot 7 series - W730 User Manual - German - 20 pages

Ecovacs Winbot 7 series - W730 User Manual - French - 20 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ecovacs Winbot 7 series - W730 Manual

Product: