388190
6
Zoom out
Zoom in
Previous page
1/104
Next page
6
EN
from the mains.

The machine is suitable for use of the following
drill bits:
- Wood (HSS)
- Metal (HSS)
- Concrete / masonry (hard metal)
Mounting
Place the chuck key (10) into one of the holes
in the chuck (6).
Open the chuck (6) by turning the chuck key
(10) counterclockwise.
Insert the drill bit (12) into the chuck (6).
Close the chuck (6) by turning the chuck key
(10) clockwise.
Remove the chuck key (10) from the chuck (6).
Removing
Place the chuck key (10) into one of the holes
in the chuck (6).
Open the chuck (6) by turning the chuck key
(10) counterclockwise.
Remove the drill bit (12) from the chuck (6).
Close the chuck (6) by turning the chuck key
(10) clockwise.
Remove the chuck key (10) from the chuck (6).
Mounting and removing the auxiliary grip

Mounting
Loosen the auxiliary grip (8).
Slide the auxiliary grip (8) over the chuck (6).
Turn the auxiliary grip (8) to the required
position.
Tighten the auxiliary grip (8).
Removing
Loosen the auxiliary grip (8).
Remove the auxiliary grip (8) from the chuck (6).
Tighten the auxiliary grip (8).

The depth stop is used to set the maximum
drilling depth.
Mounting
Loosen the auxiliary grip (8).
Insert the depth stop (9) through the hole in
the auxiliary grip (8).
Set the depth stop (9) to the required position.
Tighten the auxiliary grip (8).
Removing
Loosen the auxiliary grip (8).
Remove the depth stop (9) from the auxiliary
grip (8).
Tighten the auxiliary grip (8).
USE

To switch on the machine, press the on/off
switch (1). The further the on/off switch (1) is
pressed, the higher the speed of the machine.
To switch the machine to continuous mode,
keep the on/off switch (1) pressed and
simultaneously press the lock-on button (2).
To switch off continuous mode, press the on/off
switch (1) again.
To switch off the machine, release the on/off
switch (1).

2
Do not change the direction of rotation
during use.
For clockwise rotation, slide the forward/
reverse switch (4) to the left.
For counterclockwise rotation, slide the
forward/reverse switch (4) to the right.

2
Do not set the speed during use.
Turn the speed adjustment wheel (3)
clockwise to increase the maximum drilling
speed.
Turn the speed adjustment wheel (3)
counterclockwise to decrease the maximum
drilling speed.

2
Do not change the operating mode
during use.
Set the switch (5) to position ”A” for drilling.
Set the switch (5) to position ”B” for hammer
drilling.
Hints for optimum use
Clamp the workpiece.
Firmly hold the machine with both hands.
Place the drill bit on the workpiece.
Switch on the machine.
Do not apply too much pressure on the
machine. Let the machine do the work.
Switch off the machine and wait for the
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Economy ebf 500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Economy ebf 500 in the language / languages: English, German, Dutch, Danish, French, Italian, Norwegian as an attachment in your email.

The manual is 14,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info