Manual Ecoforest Vigo II (page 41 of 132) (English, French, Italian, Portuguese, Spanish)

742210

Zoom out

Zoom in

1/132

5.16. Review the glass door joints.

Review in detail any imperfections which may cause an air inlet. Replace them if necessary.

5.17. Cleaning the dirt which may be accumulated inside the stove, accessing through the back.

5.18. Empty the hopper to take remaining pellets out to avoid pellets absorb humidity.

IMPORTANT: After cleaning or fixing, make sure the stove operates correctly. Once you turn the stove off or

during the seasons when you do not use it, disconnect the stove to avoid electronic damages.

CHECKING AT BEGINNING OF SEASON.

It consists in controlling the combustion air inlet and gas outlet; make sure nothing prevents normal

circulation (e.g. bird nests). The gas outlet must also be inspected for possible water infiltrations.

In addition, it is recommended to clean the base of floor of the stove, the back side of the stove that you

reach through the back grid or lateral doors, in order to take eventual dust away that might have stacked during

summer time.

6. PROBLEMS AND RECOMMENDATIONS.

WHAT NOT TO DO.

6.1. Do not turn the stove on and off successively because this might damage the electronical components and

motors ~230/240V - 50Hz.

6.2. Do not touch the stove while your hands are wet. Though the stove is equipped with ground plug, it remains

an electric machine that could cause electric discharge if handled incorrectly. A qualified technician only shall

resolve the eventual problems.

6.3. Do not remove any screw of the zones exposed to high temperature before they have been lubricated

properly with lubrication oil.

WHAT DO TO IF...

THE STOVE REMAINS OUT OF POWER:

6.4. Make sure the stove is connected and the plug is leading power.

6.5. Make sure the cable is not damage or cut.

While the stove is disconnected, dismantle the right side of the stove and check if any lead of the C.P.U. is

slack.

6.6. Check the C.P.U pilot. If it is OFF, check also the fuse on the C.P.U.

PELLETS DO NOT FALL AND THE STOVE DOES NOT TURN ON:

6.7. Check if there are pellets in the hopper.

6.8. Make sure the glass door is closed.

6.9. Make sure the gas outlet tube is not obstructed by anything (e.g. bird nest, plastic, etc.).

6.10. Make sure the exhaust motor works, because if it does not work fuel will not fall.

6.11. If the reducer motor does not rotate and the displays indicates the pulses, the first thing to do will be unplug

the stove and verify if the safety thermostat has been activated. With the stove unplugged, check that the

safety thermostat is located inside the stove, by opening the right side. To activate it, you must press the

button. If the thermostat is activated you will hear a “click”. If the safety thermostat had been activated

before, consult your dealer.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ecoforest Vigo II in the language / languages: English, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 10,98 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ecoforest Vigo II Manual

Product: