815534
183
Zoom out
Zoom in
Previous page
1/192
Next page
182
CONTROL OF THE REVISIONS AND ANNUAL MAINTENANCE.
In order to optimize the functioning of your stove ECOFOREST it is necessary to carry out the operations of
maintenance detailed in chapter 5 of the instructions manual. Those that shall be done annually must be carried out
by an authorized technician. Contact your distributor so that he sends you the qualified personnel required. Consider
than in order not to lose the warranty of your stove, you must carry out this annual maintenance and for it to remain
valid, the technician who carries it out must fill in, sign (or stamp) the following forms:
Name of technician:
Name of technician:
Date:
Date:
Clean heat exchanger pipes (if any).
Clean heat exchanger pipes (if any).
Clean fireplace. (lateral holes).
Clean fireplace. (lateral holes).
Dismantle extractor and clean collector of gas outlet.
Dismantle extractor and clean collector of gas outlet.
Clean gas outlet extractor.
Clean gas outlet extractor.
Replace extractor joints, both from socket and motor.
Replace extractor joints, both from socket and motor.
Clean gas outlet pipe and check it is in perfect condition
Clean gas outlet pipe and check it is in perfect condition
Hoover the bottom side of the stove to avoid convector to
take the stacked dust.
Hoover the bottom side of the stove to avoid convector to
take the stacked dust.
Make sure the basket isn’t bended nor broken.
Make sure the basket isn’t bended nor broken.
Check ashtray’s and door’s joint.
Check ashtray’s and door’s joint.
After cleaning, make sure the stove operates correctly.
After cleaning, make sure the stove operates correctly
If everything works properly, disconnect the stove until next
use.
If everything works properly, disconnect the stove until next
use.
Stamp or signature:
Stamp or signature:
Name of technician:
Name of technician:
Date:
Date:
Clean heat exchanger pipes (if any).
Clean heat exchanger pipes (if any).
Clean fireplace. (lateral holes).
Clean fireplace. (lateral holes).
Dismantle extractor and clean collector of gas outlet.
Dismantle extractor and clean collector of gas outlet.
Clean gas outlet extractor.
Clean gas outlet extractor.
Replace extractor joints, both from socket and motor.
Replace extractor joints, both from socket and motor.
Clean gas outlet pipe and check it is in perfect condition
Clean gas outlet pipe and check it is in perfect condition
Hoover the bottom side of the stove to avoid convector to
take the stacked dust.
Hoover the bottom side of the stove to avoid convector to
take the stacked dust.
Make sure the basket isn’t bended nor broken.
Make sure the basket isn’t bended nor broken.
Check ashtray’s and door’s joint.
Check ashtray’s and door’s joint.
After cleaning, make sure the stove operates correctly.
After cleaning, make sure the stove operates correctly
If everything works properly, disconnect the stove until next
use.
If everything works properly, disconnect the stove until next
use.
Stamp or signature:
Stamp or signature:
183


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ecoforest Viggo III at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ecoforest Viggo III in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 5.93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ecoforest Viggo III

Ecoforest Viggo III User Manual - English, German, Dutch, French, Italian, Portuguese, Spanish - 228 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info