Manual Ecoforest Teide (page 47 of 152) (English, French, Italian, Portuguese, Spanish)

742221

Zoom out

Zoom in

1/152

WHAT DO TO IF...

THE STOVE REMAINS OUT OF POWER:

6.4. Make sure the stove is connected and the plug is leading power.

6.5. Make sure the cable is not damage or cut.

While the stove is disconnected, dismantle the right door of the stove and check if any lead of the C.P.U. is

slack.

6.6. Check the C.P.U pilot. If it is OFF, check also the fuse on the C.P.U.

PELLETS DO NOT FALL AND THE STOVE DOES NOT TURN ON:

6.7. Check if there are pellets in the hopper.

6.8. Make sure the glass door is closed.

6.9. Make sure the gas outlet tube is not obstructed by anything (e.g. bird nest, plastic, etc.).

6.10. Make sure the exhaust motor works, because if it does not work fuel will not fall.

6.11. If the reducer motor does not rotate and the displays indicates the pulses, the first thing to do will be unplug

the stove and verify if the safety thermostat has been activated. With the stove unplugged, check that the

safety thermostat is located inside the stove. We will find the safety thermostats (with and without reset) in

the stove models by accessing them through the right-hand side (opening the door to the right). One of the

thermostats is located on the upper part of the housing and the other one in the lower part of the hopper.

Insert stoves have the hopper thermostat in the same place, but the safety thermostat may be activated

from the outer side simply by unscrewing the topper that protects it. In model ECO III insert (drawing 37), the

user may find the safety thermostat at the bottom of the right panel. However, the safety thermostat on the

Córdoba stove can be reached by opening the housing door, above the door closure mechanism.

To activate it, you must press the button. If the thermostat is activated you will hear a “click”. If the safety

thermostat had been activated before, get in touch with your distributor.



Safety thermostat with reset

Drawing 37

6.12. If the reducer motor receives current and rotate slower than usually, it may have something blocked such as

a screw, a piece of wood, etc. To solve this problem, you must empty the hopper and, even if necessary, to

remove the auger screen.

6.13. If when the reducer motor rotates makes a noisy is due to a lack of lubrication- you have to lubricate only the

auger screen, not the reducer motor, see point 5.15.

PELLETS FALL BUT THE STOVE DOES NOT TURN ON:

6.14. Make sure the glass door is well closed.

6.15. Make sure the burn pot is correctly placed, that it is in contact with the resistance tube and the central hole

of the burn pot goes along with this tube.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ecoforest Teide in the language / languages: English, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 9,82 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ecoforest Teide

Ecoforest Teide User Manual - English, German, Dutch - 228 pages

Ecoforest Teide Installation Guide - Dutch - 208 pages

Ecoforest Teide User Manual - French, Italian, Portuguese, Spanish - 228 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ecoforest Teide Manual

Product: