815617

Ecoforest ecoTHERMO 200 Manual

49
Zoom out
Zoom in
Previous page
1/352
Next page
User manual
49
EN
Auxiliary heating
This is used to enable the auxiliary heating system in both EMERGENCY and SUPPORT
mode.
Note: In EMERGENCY mode, the auxiliary system is activated automatically when any of
the alarms are active.
In SUPPORT mode, the auxiliary system is activated automatically for normal HEAT
production, as programmed by the technical service.
3.12. COOLING Menu
Cooling
This is used to enable the COOLING mode and adjust the active and passive cooling cut-
off temperatures. The COOLING mode cannot be activated for outside temperatures
under the cooling cut-off temperature. Only PASSIVE COOLING can be activated for
outside temperatures between passive and active cut-off temperatures. ACTIVE
COOLING activation is only allowed for outside temperatures over the active cooling cut-
off temperature.
The icon indicates that there is a time schedule activated in the COOLING mode.
Cooling buffer
This displays the setpoint temperature of the cooling buffer storage tank and allows
adjustments to be made to the start-up temperature differential.
Cooling units
This can be used to adjust the cooling target outlet temperatures programmed by the
technical service. Each ramp increases or decreases the outlet temperature by 2ºC.
Interior terminals
Used to show and adjust the inside environment temperature setpoint (Tcons) and the
comfort temperature differential (DTc) of the terminals of each outlet unit.
Note: This configuration is associated with the heating and cooling services. If it is
modified for the heating service, it will automatically change for the cooling service and
vice versa.
XXXXX XXXXX
58
Emergency:
Support:
58
User menu 4/8
Heating
ooling
DHW/Legionella prot
4/8 ooling
Enable:
StopT:
Active: 8
Passive: 
ooling buffer
SetT:
8
DTstart: 3

ooling groups
-  + -  +
DG:
SG:
3
SG3:
SG4:
Room terminals
Tset
DTc
Z:  
Z:  
Z3:  
Z4:  
Z5:  
… 49 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ecoforest ecoTHERMO 200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ecoforest ecoTHERMO 200 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 9.07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info