782436
40
Zoom out
Zoom in
Previous page
1/128
Next page
19-20
STORINGSMELDING BOVEN OF POMP AAN/UIT
Dit contact is N.O. (max. 230 VAC, 0,8 A Normaal Open). Als de ketel in storing staat, is dit contact
gesloten. Dit contact kan ook worden gebruikt om een pomp met separate stuuringang aan/ uit te zet-
ten; dan is een parameterwijziging nodig.
21-22
BEDRIJFSMELDING BOVEN OF EXTRA KETEL OF POMP AAN/UIT
Dit contact is N.O. (max. 230 VAC 0,8 A Normaal Open). Als de ketel de bovenbrander start en een
vlamsignaal detecteert, sluit dit contact. Dit contact kan ook worden gebruikt om een externe ketel aan
te sturen, of om een pomp met separate stuuringang aan/uit te zetten; in deze laatste gevallen is een
parameterwijziging nodig.
23-24
WARMTE VRAAG BOVEN OF POMP AAN/UIT
Dit contact is N.O. (Normaal Open). Als de ketel een warmtevraag krijgt, wordt dit contact gesloten. Dit
contact kan ook worden gebruikt om een pomp met separate stuuringang aan/uit te zetten; dan is een
parameterwijziging nodig.
25-26
STORINGSMELDING ONDER
Dit contact is N.O. (Normaal Open). Als de ketel in storing staat, is dit contact gesloten.
27-28
BEDRIJFSMELDING ONDER
Dit contact is N.O. (Normaal Open). Als de ketel de onderbrander start en een vlamsignaal detecteert,
sluit dit contact.
29-30
WARMTE VRAAG ONDER
Dit contact is N.O. (Normaal Open). Als de ketel een warmtevraag krijgt, wordt dit contact gesloten.
34-35-36
CV-SYSTEEM POMP P3
Aansluiting voor aansturing van de CV-systeempomp (P3).
Gebruik deze aansluiting niet voor de voeding van deze pomp maar gebruik daarvoor een ex-
tern relais.
37-38-39-40
3-WEG KLEP BOILER/TANK
Als een warmwaterboiler/tank wordt toegepast, moet er een 3-wegklep of een pomp (P2) worden ge-
bruikt om CV-water naar de verwarmingselementen van de boiler/tank te transporteren. Deze 3-
wegklep gaat open, als de warmwaterboiler/tank een warmwatervraag heeft.
PARAMETER: Een parameterwijziging is nodig.
38-39-40
BOILER/TANK POMP P2
Als een warmwaterboiler/tank wordt toegepast, moet er een 3-wegklep of een pomp (P2) worden ge-
bruikt om CV-water naar de verwarmingselementen van de boiler/tank te transporteren. Deze pomp
schakelt in, als de warmwaterboiler/tank een warmwatervraag heeft. PARAMETER:Een parameterwij-
ziging is nodig.
41-42-43
INTERNE NETAANSLUITING
LET OP! Gebruik deze connector NIET voor de netaansluiting van het toestel! De netvoeding dient
aangesloten te worden op het aansluitblok zoals aangegeven in de figuren op blz. 38 hierboven.
STEKKER: deze interne netaansluiting 41-42-43 kan worden gebruikt om de netvoeding naar het sys-
teem te onderbreken.
Normaal gesproken is het niet nodig deze stekker los te koppelen. Bij werkzaamheden aan de elektri-
sche installatie van het toestel adviseren wij de voeding naar voornoemd aansluitblok (figuren op blz.
38) los te koppelen.
41 = fase; 42 = aarde; 43 = 0-draad.
Voorzichtig! Na het losmaken van deze connector zijn er nog steeds spanning voerende onderdelen
aanwezig in het toestel.
Geadviseerd wordt om extern een aparte werkschakelaar (die alle polen afschakelt) in het systeem op
te nemen zodat service aan de ketel kan plaatsvinden met alle bekabeling spanningsvrij.
E93.1301NL.E Senator+ CV
40
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eco Heating Systems Senator plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eco Heating Systems Senator plus in the language / languages: Dutch as an attachment in your email.

The manual is 4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info