782440
106
Zoom out
Zoom in
Previous page
1/146
Next page
E93.1803.900 HW
108
16.3.5 CASCADE VERMOGENSBALANSMODUS
Er kunnen verschillende vermogenscontrolemodi worden geselecteerd om het cascadesysteem te bedienen.
Vermogen modus 0: Vermogenscontrole uitgeschakeld, elke ketel moduleert op basis van het systeem Setpoint.
Vermogen modus 1: Vermogenscontrole-algoritme om een minimaal aantal ketels actief te hebben.
Vermogen modus 2: Vermogenscontrole-algoritme om een maximaal aantal ketels actief te hebben.
Vermogen modus 3: Vermogenscontrole-algoritme voor een gebalanceerde hoeveelheid actieve ketels.
Cascade Ketelrotatie
De ketelrotatie functie kan de start/stop-volgorde voor de cascadeketels wijzigen.
De parameter Ketel_Rotation_Interval stelt het aantal dagen in waarna de reeks wordt bijgewerkt. Wanneer Ke-
tel_Rotation_Interval is ingesteld op 0, is de ketelrotatie uitgeschakeld.
Wanneer de parameter Burner_Rotation_Interval wordt bijgewerkt, worden de rotatiedagen van de ketel die nog
over zijn naar de nieuwe instelling Burner_Rotation_Interval geïnitialiseerd.
Wanneer bijvoorbeeld Burner_Rotation_Interval = 5, is de startvolgorde (x is de laatste ketel):
Dagen
Start/Stop volgorde
Dag 0-5
1-2-3-4-5-6..x
Dag 5-10
2-3-4-5-6..x-1
Dag 10-15
3-4-5-6..x-1-2
Dag 15-20
4-5-4..x-1-2-3
Dag 20-25
5-6..x-1-2-3-4
Met parameter First_Depending_To_Start wordt de huidige afhankelijke geselecteerd die de eerste is die moet
starten in de reeks.
Wanneer de ketels worden geroteerd, wordt de parameter First_Depending_To_Start automatisch afhankelijk van
de volgende bijgewerkte. Wanneer ketelrotatie is uitgeschakeld, wordt de parameter First_Depending_To_Start
teruggezet naar 0.
Wanneer de First_Depending_To_Start handmatig wordt gewijzigd, zal de besturing alle vragen van de cascade-
regelaar wissen. Hierna start de cascade-vraaggeneratie met de nieuwe selectie voor First_Depending_To_Start.
16.4.1 VOLGENDE AFHANKELIJKE DIE DE SELECTIE START
Wanneer de cascade Burner_Rotation_Interval tijd voorbij is, voert de besturing de cascaderotatie uit. Op dit
moment wordt de volgende beschikbare branderautomaat op basis van de huidige First_Depending_To_Start
geselecteerd.
Een afhankelijke branderautomaat is beschikbaar wanneer de branderautomaat wordt gezien op de communica-
tie bus en de automaat niet wordt geblokkeerd door een fout.
Wanneer de brander automaat niet beschikbaar is, wordt deze branderautomaat overgeslagen als de volgende
First_Depending_ To_Start.
Relevante variabelen
Specifieke parameters
Niveau
(Standaard) Waarde
Bereik
(84) Module_Rotatie_Interval
2: Installateur
5
0 ... 30
(0: uitgeschakeld)
(149) Eerste_Start_Module
2: Installateur
1
1 ... 8/16
106


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eco Heating Systems CB 155 HW at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eco Heating Systems CB 155 HW in the language / languages: Dutch as an attachment in your email.

The manual is 7.4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info