654249
25
Zoom out
Zoom in
Previous page
1/33
Next page
Bedienungsanleitung / User Manual SYNCHRONIKA
ENGLISH
24
Please consider that the procedure described in the steps above is the same if the steam/ hot water boiler is
deactivated: also in this case the steam/ hot water boiler will be filled and the PID display indicates the temperature
in the steam/ hot water boiler. However, the orange control lamp remains off and the steam/ hot water boiler will
not be heated.
Before preparing the first coffee, please clean the machine by extracting about 2L of hot water from
the brew group and the hot water wand.
Machine in use with a direct water connection (steam/ hot water boiler activated)
1 Please make sure that the valve at the bottom panel of the machine and the switch behind the drip tray are in the
correct position (see chapter 4.3, image 1 and 2).
2 Make certain that the pump pressure gauge indicates enough pressure.
3 Plug the machine into an electrical outlet. Place the brew lever into the upper position.
4 Turn the machine on by placing the metal switch in the upper position. The green control lamp and the PID
display will come on and a pump noise will be heard. The coffee boiler and the steam/ hot water boiler are now
filled with water simultaneously.
As soon as water is released through the brew group, position the brew lever back downward. If there is still a
pump noise, the filling of the steam/ hot water boiler is still being completed.
5 As soon as both boilers are filled with water, the pump will become quiet. The PID display and the orange control
lamp will illuminate. Both boilers are now being heated in succession whereby the coffee boiler has priority.
6 The PID display will show the current temperatures of both boilers alternately (see chapter 3.3).
The machine is ready for coffee preparation as soon as the PID display indicates the pre-set nominal temperature
of 93°C (factory setting). The machine is ready for steam/ hot water dispension as soon as the PID display
indicates the pre-set nominal temperature of 123°C (factory setting) or the boiler pressure gauge indicates a
value of about 1.0-1.5 bars.
7 Manual boiler venting is not necessary because the Synchronika contains a professional anti-vacuum valve, which
automatically vents the boiler during the heat-up phase. This venting process is done by way of the brew group,
directly into the drip tray. Caution, steam forms!
8 The machine is now ready for use.
Please consider that the procedure described in the steps above is the same if the steam/ hot water boiler is
deactivated: also in this case the steam/ hot water boiler will be filled and the PID display indicates the temperature
in the steam/ hot water boiler. However, the orange control lamp remains off and the steam/ hot water boiler will
not be heated.
The SYNCHRONIKA has a fuse to prevent the machine from overfilling.
It is possible that the machine does not heat up when using it for the first time or when dispensing
large quantities of water through the hot water valve. In this case, please switch the machine off and
on again.
Filter holder, drip tray, drip grid and water tank are not suitable for the dish washer.
6 USE OF THE MACHINE
6.1 Preparation of the machine
The switched off machine is to be placed into operation as follows:
Water tank machine or machine in use with water tank
1 Fill the water tank.
2 Make sure there is enough water in the tank.
3 Now turn the machine on (the metal switch in the upper position and the left switch behind the drip tray in
position ‘0’).
To use the steam function, press the right switch behind the drip tray in position ‘I’ (image 3, page 23).
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ecm Synchronika at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ecm Synchronika in the language / languages: English, German as an attachment in your email.

The manual is 2,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ecm Synchronika

Ecm Synchronika User Manual - English, German - 62 pages

Ecm Synchronika User Manual - Dutch - 22 pages

Ecm Synchronika User Manual - Dutch - 62 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info