362350

Ecm mechanika profi Manual

29
Zoom out
Zoom in
Previous page
1/58
Next page
ENGLISH
Instruction manual MECHANIKA · MECHANIKA PROFI
28
11 TROUBLE SHOOTING
Problem Possible Cause Trouble-shooting
The grinding degree is not fine
enough
Use a finer grinding degree.
Tamp the ground coffee more firmly.
Reduce the brewing pressure.
The coffee mixture is too old. Use fresh coffee
There is too much chlorine in the
water.
Use a chlorine filter.
The amount of ground coffee is not
enough.
Take the right coffee amount:
Use approx. 7 g of coffee for each
cup.
Little or no crema on the top of the
coffee
The net filter is dirty. Clean the brewing group.
The grinding is too fine.
Increase the grinding degree.
Tamp the ground coffee only
slightly.
Increase the brewing pressure.
Sparse coffee dispensing, only drop
by drop
There is too much ground coffee.
Use approx. 7 g of coffee for every
cup.
The grinding degree is not fine
enough.
Reduce the grinding degree.
The coffee is old. Use fresh coffee.
The amount of ground coffee is not
enough.
Use approx. 7 g of coffee for each
cup.
Weak “body”
The net filter is dirty. Clean the net filter.
The coffee mixture is improper Use another coffee mixture
Foam instead of crema
The grinding degree of the coffee
grinder is not suited for the coffee
mixture in use
Adjust the coffee grinder (When
changing the coffee mixture,
changing the grinding degree can
also be necessary.)
The orange control lamp is switched
off: there is not enough water in the
water tank.
Refill water.
Water was refilled, the orange
control lamp is switched off.
Switch on/off the machine.
Make sure that the floater in the
water tank is in the right position.
(The side of the floater with the
magnet point should face towards
the inside of the machine. The
floater itself should be inserted with
the magnet point on the lower part
of the floater side.)
The machine is switched on, but the
machine does not work.
The water tank is not fixed properly. Fix the water tank properly.
Filter holder is not fixed properly. Fix the filter holder properly.Filter holder/ brewing group is
dripping
Group gasket is broken. Change group gasket and net filter.
If the machine has not been used for a longer period of time, it is recommended to
.. clean the group (see instructions, page 24). After this, please do not clamp the filter holder back to the group.
.. empty the boiler. Switch the machine off (power switch in position “0”) and open the hot water dispenser. Due to
the boiler pressure, the boiler water is now discharged by the hot water dispenser. Close the hot water handle
(MECHANIKA) or the hot water lever valve (MECHANIKA PROFI) again after emptying the boiler. To restart the
machine, see chapter “First use”.
… 29 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ecm mechanika profi at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ecm mechanika profi in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 4,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info