362350

Ecm mechanika profi Manual

26
Zoom out
Zoom in
Previous page
1/58
Next page
ENGLISH
Instruction manual MECHANIKA · MECHANIKA PROFI
25
13 Operate the group lever for 3 times. Move the lever into the lower position after every operation. Thus, the
expansion valve will be rinsed. Then remove the blind filter from the filter holder.
14 Operate the group lever for approx. 60 seconds in order to rinse the heat exchanger.
15 Repeat point 9 – 11 three to five times in order to rinse the boiler.
Important
These descaling instructions are only meant for prophylactic descaling. Please do not descale the
machine if it is already calcified. While descaling the machine, the lime residues can plug several
components, like valves, gauges etc., causing damage to your espresso coffee machine. In this case,
please contact your specialised dealer. It is probable that a professional descaling has to be carried out
which requires the disassembling of boiler and tubing.
Damage to persons or to the material, caused by calcification in and at your machine, is not subject to
the producer’s liability.
In this case, also the warranty expires. Machines will be only accepted for repair after foregoing
technical advice and written acknowledgement.
Please do not enclose loose parts e. g. filter holder or drip tray when sending in the machine for
repairs / maintenance.
7.4 Maintenance
(If you have any questions, please contact your specialised dealer.)
Replacing the group gasket and the net filter (Group gasket (item no. C449900229) and net filter (item no.
C519900103) must be changed at the same time)
1 Switch off the machine (power switch in position“0”) and disconnect the power cord.
2 Open the steam valve and release the steam. Then close it again.
3 Let the machine cool down to ambient temperature.
… 26 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ecm mechanika profi at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ecm mechanika profi in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 4,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info