Manual Ecm mechanika profi (page 19 of 58) (English, German, Dutch)

362350

Zoom out

Zoom in

1/58

ENGLISH

Instruction manual MECHANIKA · MECHANIKA PROFI

1 PRODUCT DELIVERY

1 filter holder 1 spout

1 filter holder 2 spouts

1 filter 1 cup

1 filter 2 cups

1 blind filter

1 measuring-spoon

1 coffee tamper

1 instruction manual

1 silicone tube for water filter

1 cleaning brush

2 GENERAL ADVICE

2.1 General safety notes

 Make sure that the local main supply voltage corresponds to the information given on the type

plate on the front panel of the espresso machine.

 Carry out the installation of the machine according to the instruction in chapter 4.

 Plug the machine only into an earthed socket and do not leave it unattended.

 Do not roll or bend the power cord.

 Do not use an extension cord/ do not use a multiple socket.

 Place the machine on an even and stable surface. You can regulate the height of the machine by

adjusting the feet of the machine.

 Never place the machine on hot surfaces.

 Never immerse the machine in water; do not operate the machine with wet hands

 Machine should only be used by instructed adult persons.

 Machine is not intended for use by persons (including children) with reduced physical, sensory or

mental capabilities, or lack of experience and knowledge, unless they have been given supervision

or instruction concerning use of the appliance by a person responsible for their safety.

 Children should be supervised to ensure that they do not play with the appliance.

 Do not expose the machine to the effects of weather (frost, snow, rain) and do not use it

outdoors.

 Keep the packing out of the reach of children.

 Only use original spare parts.

 Do not operate the machine with carbonated water, but with soft potable water.

 Do not operate the machine without water.

If you have any further questions or if you require any further information, please contact your specialised dealer

before starting up the espresso coffee machine.

Our machines comply with the relevant safety regulations.

Any repairing or change of single components must be carried out by an authorised specialised dealer.

In case of non-observance the manufacturer does not assume liability and is not liable to recourse.

Ask for authorised service points outside Europe. See page 1 for your specialised dealer’s contact details.

Where necessary, make use of a water softener / water filter cartridge in order to reach an adequate

hardness degree. If these measures are insufficient, a prophylactic descaling of the machine is

possible. Contact your specialised dealer before undertaking this measure. Follow our descaling

instructions (see page 24). Doing so, you will protect your machine against expensive repairing.

An already calcified machine may only be descaled by your specialised dealer because a partial

disassembling of the boiler and the tubing will be necessary to prevent the system from being blocked by

lime residues. A late descaling can cause substantial damage to the machine.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ecm mechanika profi in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 4,42 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ecm mechanika profi Manual

Product: