458757
22
Zoom out
Zoom in
Previous page
1/58
Next page
ENGLISH
Instruction manual ELEKTRONIKA PROFI
21
4 MACHINE INSTALLATION
The installation is to be carried out exclusively by qualified staff and according to the following
instructions and in compliance with valid laws.
The following chapters deal with the preparation of the machine, its electricalconnection, water supply connection
and drain connection. Please note that for water tank machines, only the subchapters “Preparation of the machine”
and “Electrical connection” are relevant.
4.1 Preparation for the installation
Place the machine on an even and stable surface. You can regulate the height of the machine by
adjusting the feet of the machine.
Never place the machine on hot surfaces.
4.2 Electrical connection
Make sure that the local main supply voltage corresponds to the information given on the type
plate on the front panel of the espresso machine.
Plug the machine only into an earthed socket and do not leave it unattended.
Do not roll or bend the power cord.
Do not use an extension cord/ do not use a multiple socket.
4.3 Water supply connection
Important!
Make sure that the water supply installation is connected to potable water supply with an operating
pressure ranging from 0 to 3 bar. In case of an operating pressure of more than 3 bar use a pressure
regulator.
Please note that often the pressure of the water supply varies. If the water supply pressure temporarily
exceeds 3 bar, use a pressure regulator.
Connect the water connecting hose of the machine to the water supply valve and bolt them together.
Important!
The connection of the machine to the water supply and the installation of the pressure regulator is
to be carried out by expert staff.
To avoid an early calcification of the machine we recommend to use a water softener/ water filter.
Conventional water softener/ water filter can be purchased at your specialised dealer. However,
please note that even when using a water softener/ water filter the machine needs to be descaled
regularly.
4.4 Drain connection
By default, also in machines with water connection the user can dispose of the excessive water by regularly emptying
the drip tray.
However, it is possible to belatedly install a direct connection to the drain system. Therefore, find a fitting and a
drain hose in the product delivery.
Important!
In case you should go for a direct connection of the machine to the drain system, a hole has to be
drilled in the drip tray. This work can be carried out by expert specialised staff or by ECM
Manufacture service.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ecm ELEKTRONIKA PROFI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ecm ELEKTRONIKA PROFI in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 3,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info