654244

Ecm Elektronika II Profi Manual

24
Zoom out
Zoom in
Previous page
1/33
Next page
ΕNGLISH
Instruction manual ELEKTRONIKA II PROFI
23
5 FIRST USE
5.1 First use
Read the instruction manual carefully before operating the machine.
Before starting the machine, check if:
• the steam and hot water valves are closed.
• the machine is switched off. (Power switch in lower position.)
• the power cord is disconnected.
• the drip tray is inserted accurately.
Water tank machine or machine in use with water tank
1 Open the lid of the cup warmeing tray.
2 Take out the water tank and rinse it thoroughly.
3 Fill the water tank with fresh water deficient in lime, place it back into the water tank guides and close the lid.
4 Insert the plug into the wall socket. Turn the power switch to “1”. The machine is now on.
5 The green control lamp lights up.
6 The pump will fill the boiler of the machine with fresh water.
7 As soon as the boiler is filled, there will be no more pump noise; the control panel lights up. As soon as the fresh
water sinks down to a certain level in the fresh water tank, the machine is switched off and the buttons of the
control panel flash. Now refill fresh water. The machine heats up automatically.
8 Because a large amount of water is required for the first filling of the boiler, the water tank has to be refilled with
fresh water.
9 Wait until the boiler pressure gauge indicates approx. 1.0-1.25 bar.
10 A manual “boiler ventilation” is not necessary because the ELEKTRONIKA II PROFI is equipped with a
professional depression valve that ventilates the boiler during the heat-up phase.
11 Move the group lever into the upper position and dispense approx. 250 ml of water. This way, the heat exchanger
will be filled with water and the circulation of the water in the thermosyphon system begins.
12 Move the group lever into the lower position. Refill the water tank.
13 The machine is now ready for use. Put the cups on the cup warming tray in order to preheat them and enjoy your
coffee.
Machine in use with direct water connection
1 Insert the plug into the wall socket. Turn the power switch to “1”. The machine is now on.
2 The green control lamp lights up.
3 The pump begins to fill the boiler of the machine with fresh water.
4 As soon as the boiler has filled, no more pump noise will be heard; the control panel lights up.
5 Wait until the boiler pressure gauge indicates approx. 1.0-1.25 bar.
6 A manual “boiler ventilation” is not necessary because the ELEKTRONIKA II PROFI is equipped with a
professional depression valve that ventilates the boiler during the heat-up phase.
7 Move the group lever into the upper position and dispense approx. 250 ml of water. This way, the heat exchanger
will be filled with water and the circulation of the water in the thermosyphon system begins.
8 Move the group lever into the lower position.
9 The machine is now ready for use. Put the cups on the cup warming tray in order to preheat them and enjoy your
coffee.
The ELEKTRONIKA II PROFI has a fuse to prevent the machine from overfilling.
It is possible that the machine does not heat up when using it for the first time or when dispensing
large quantities of water through the hot water valve. In this case, please switch the machine off and
on again.
… 24 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ecm Elektronika II Profi at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ecm Elektronika II Profi in the language / languages: English, German as an attachment in your email.

The manual is 2,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info