654274
22
Zoom out
Zoom in
Previous page
1/29
Next page
21
5.2 Programming of the temperature
During normal operations, the right-side display of the PID-control will indicate the temperature of the coffee boiler
for the brew temperature at the right brew group (t1) and the temperature in the steam- hot water-boiler (t2)
alternately.
The left display of the PID-temperature control for the coffee boiler will indicate the brew temperature at the left
brew group (t1).
Please proceed as follows in order to control the temperature of all boilers:
1. Switch your machine on. The temperature of the boiler is of no importance for
programming. The heaters are turned off during the programming process.
2. Press
+
and
at the same time, until ‘t1’ (coffee boiler) appears on the
display.
3. Press + to reach the submenue of ‘t1’ for adjusting the temperature value. The
currently programmed temperature value is indicated.
4. Quickly press
to lower
+
to increase
the required temperature value
5. Wait a short period of time after adjusting the required temperature value,
you will see
„t1“
6. Press
in order for ‘t2’ (steam- hot water-boiler) to be displayed.
If you would only like to change ‘t2’ and leave ‘t1’ unchanged, press
after
position 2, in order to skip ‘t1’ and reach ‘t2’ directly. Afterwards proceed with
position 7.
7. Press
+
in order to reach the submenue of ‘t2’ and to adjust the temperature
value. The currently programmed temperature value is indicated.
8. Quickly press
to lower
+
to increase
the required temperature value
9. Wait a short period of time after adjusting the required temperature value,
you will see
„t2“
10. Press
in order to leave the programming mode.
The newly adjusted temperature values are now saved.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ecm Controvento Due at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ecm Controvento Due in the language / languages: English, German as an attachment in your email.

The manual is 4,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info