Manual Ecm Classica II (page 26 of 53) (English, German, Dutch)

647412

Zoom out

Zoom in

1/53

ENGLISH

Instruction manual CLASSIKA

Water was refilled, the orange control

lamp is switched off.

Switch on/off the machine.

Make sure that the floater in the

water tank is in the right position.

(The side of the floater with the

magnet point should face towards the

inside of the machine. The floater

itself should be inserted with the

magnet point on the upper part of the

floater side.)

The machine is switched on, but the

machine does not

The water tank is not fixed properly. Fix the water tank properly.

Filter holder is not fixed properly. Fix the filter holder properly.

Filter holder/ brewing group is

dripping

Group gasket is broken. Change group gasket and net filter.

If the machine has not been used for a longer period of time, it is recommended to

.. clean the group (see instructions, point 7.2). After this, please do not clamp the filter holder back to the group.

.. empty the boiler. Switch the machine off (power switch in lower position) and open the hot water dispenser. Due to

the boiler pressure, the boiler water is now discharged by the hot water dispenser. Close the steam/ hot water handle or

the hot water lever valve again after emptying the boiler. To restart the machine, see chapter “First use”.

How to froth milk like a “barista”

• If possible, use cold and fresh milk with a fat content of 3.5 %. Even UHT-milk is suitable.

• Use a milk jug (made of metal) with a minimum volume of 0.5 litres. The size of the container should not be too

large. A small and high container is perfect.

• Open the steam valve for approx. 5 seconds to release the condensation water and to create dry steam.

• Fill 1/3 of the jug with milk and place it under the steam nozzle. The nozzle should be immersed in the middle of the

milk jug.

• Slowly open the steam handle. The steam pervades the milk.

• Keep the milk jug still.

• After a few seconds, you will notice a light suction in the milk jug. The proper frothing begins. Move the milk jug

downwards while the milk level increases. The steam nozzle must be kept under the surface of the frothing milk.

• Attention: When the desired amount of milk froth is reached, immerse the entire steam nozzle in the milk jug and

close the steam handle.

• Attention: Milk proteins “froth”with a temperature up to 77°C. If this temperature is exceeded, the milk does not

froth anymore.

• If there is some milk left in the milk jug, let it cool down; it can be re-used later.

• Advice: When the milk frothing is finished, slightly agitate the milk jug in order make the milk bubbles ascend to

the surface and in order to get a compact milk froth.

• After frothing the milk, release the steam into the drip tray to avoid the steam nozzle to be blocked.

Cappuccino preparation step by step

1 Prepare a portion of espresso using a cappuccino cup.

2 Froth milk in a separate jug.

3 Fill the cup with the espresso and the frothed milk. Do not pour the milk but “shake” it into the cup. If necessary,

use a spoon to “shovel”the milk into the cup.

12 RECOMMENDED ACCESSORIES

• Blind filter for group cleaning (included in delivery)

• Detergent for group cleaning with blind filter (available at your specialised dealer) (item no. PAV9001034 or

89450)

• Descaler powder for regular prophylactic descaling of the machine (available at your specialised dealer) (item no.

PAV9001040)

For a perfect coffee-result a good espresso coffee machine and coffee grinder are as important as a good coffee.

Our professional espresso coffee machines and grinders are the best basis to achieve this result.

The coffee basement perfectly complements your espresso coffee machine and your grinder.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ecm Classica II in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 1,23 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ecm Classica II Manual

Product: