Manual Ecm Classica II (page 22 of 53) (English, German, Dutch)

647412

Zoom out

Zoom in

1/53

ENGLISH

Instruction manual CLASSIKA

7.1 General cleaning

Daily cleaning:

Filter holder, filters, water tank, drip tray, drip plate of the drip tray, measuring-spoon and tamper require daily

cleaning. Use warm water and/or with food safe detergent for cleaning.

Clean the shower and the group gasket in the lower part of the group and remove visible dirt without disassembling the

parts.

Cleaning as necessary:

Clean the steam/ hot water valve after every use.

Clean the body when the machine is switched off and cold.

Use a soft and damp cloth for cleaning.

Never use abrasive or chloric detergents!

Empty the water drip tray regularly and do not wait until it is full.

7.2 Group cleaning and degreasing

A group cleaner (in powder or tablet form) is available at your specialised dealer. With this detergent, you can clean and

degrease the group very easily. The cleaning is carried out using the blind filter included in delivery. The group

cleaning with our tablets can be carried out every week.

Follow the instructions as noted below:

1 Heat up the machine.

2 Put the blind filter into the filter holder.

3 Pour ½ spoon of detergent into the blind filter or put a tablet into the filter holder.

4 Place the filter holder in the group head.

5 Operate the group lever. The blind filter fills with water.

6 Let the detergent react, moving the group lever into the middle position. (Do not move it into the lower position.)

7 Move the lever into the lower position after approx. 40 seconds. In this way, the fats and oils can be discharged by

the infusion cylinder.

8 Repeat points 5-7 several times, until only clear water will be discharged by the infusion cylinder.

9 Rinse the filter holder and the blind filter with fresh water. Then replace it.

10 Operate the group lever for approx. one minute. Then move it back into the lower position.

11 Remove the filter holder and repeat point 10. After this, the group is ready for use.

Caution!

Beware of hot spillings while cleaning the group.

7.3 Prophilactic descaling

A regular descaling of the machine is recommended to avoid strong calcification and expensive repairing. While

descaling, always take into account the hardness degree of the water. It is very important to use a sparing descaler

which does not affect the metal. At your specialised dealer, you can purchase a descaler in powder or tablet form which

is perfectly suited for your machine. Just fill the water tank with fresh water and dissolve one bag of the descaler in it.

Then proceed as follows:

1 Dissolve the descaler in water according to the instructions for use (see above) and pour the solution into the water

tank. Switch on the machine.

2 Release a total minimum of 1,000 ml of water from the group and from the steam/ hot water dispenser. Thus, the

boiler is filled with descaler. Then heat up the machine.

3 Place the filter holder with the blind filter into the group head and operate the group lever 3 times for about 20 seconds.

Move the lever into the lower position after every operation. Thus, the expansion valve will be descaled.

4 After this process, let the descaler react for approx. ½ hour.

5 Release the remaining descaler solution by operating the group lever.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ecm Classica II in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 1,23 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ecm Classica II Manual

Product: