-
6
-
Deutsch English Español Français Italiano
Nederlands
Svenska
System connection e
System connection e
xample
xample
•
Install and connect all of the peripheral units before connecting them to the main unit.
•
Do not remove any of the protective caps (RCA, etc.) unless in use.
Tip
TO BATTERY+12V
(Permanent Supply)
TO TURN-ON LEAD OF POWER
AMPLIFER (Supply)
TO POWER ANTENNA RELAY (Supply)
Blue
Black
TO EARTH
INTERCONNECTING
CABLE
(Power and speaker
connector)
2
ANTENNA PLUG
MAIN UNIT
1
16P
13P
Blue/White
FRONT REAR
NON FADER
(remove caps when using
external amplifier)
DIN CABLE
(Supplied with CD changer)
Yellow
CH3083
(sold separately)
13P
2P
POWER CONNECTOR CABLE
(Supplied with CD changer)
AUX INPUT(RCA)
(remove caps when using external
audio)
DIGITAL OUT
(Do not remove cap)
Black
TO EARTH
TO VEHICLE-SIDE
CONNECTOR
•
Never cut the insulation on the power cable or use it to power any other equipment. If the rated current
capacity of the power cable is exceeded, fire and electric shocks may result.
•
The cables should be secured with tape or a similar securing method to prevent any obstructions while
driving. If they get wound or entangled around components such as the steering wheel, shifting lever,
or brake pedal, accidents may result.
•
If removing the end of the cord to connect to another cord, be sure to wrap PVC tape or a similar wire
insulating method around the connection to insulate it. If the connection is not insulated, fire or
accidents may result.
Pink
TEL MUTE
