654666
41
Zoom out
Zoom in
Previous page
1/102
Next page
39
39
When TP or both TP and TA are set to ON,
traffic information is received as follows:
Receiving traffic information
when TP is set to ON
Set TP to ON, and “TP” is displayed. If there
is an available TP station in the AF list, the TP
station is tuned in. If a TP station cannot be
tuned in, the “TP” display will flash. When this
happens, press the [Seek (Up/Down)] button
to tune a TP station.
If signal reception becomes poor after a TP
station has been received, press the [Seek
(Up/Down) ] button to select a TP station with
favorable reception.
If no TP station can be tuned in, “NOTHING”
appears, and the original FM broadcast is
received.
“TP SEEK” continues on the display when a
TP station is being searched.
Receiving traffic information
when both TP and TA are set to
ON
[When the AUDIO SOURCE is FM radio]
Set TP and TA to ON, and “TA” is displayed.
If there is an available TP station in the AF
list, the TP station is tuned in. If a TP station
cannot be tuned in, the “TA” display will flash
and the automatic TP station search begins.
“TP SEEK” is displayed while a TP station is
being selected.
If no TP station can be tuned in, “NOTHING”
appears, and the original FM broadcast is
received.
The sound is muted until a TP station is tuned
and the traffic information is displayed.
[When the AUDIO SOURCE is something
other than AM/FM radio]
“TA” is displayed. If there is an available TP
station in the AF list, the TP station is tuned
in. If its tuning fails, another TP station is
searched automatically. When TA
information is received, the current audio
playback is stopped and automatically
switched to output traffic information. While
TA information is being received, the system
switches to traffic information interrupt mode.
If you have selected a non-radio mode
source, you can check if the TA is turned
ON or OFF on the sub-display by pressing
the [TP/TEXT] button for 1 or more
seconds.
If the current TP station is not broadcasting
traffic information or if the signal becomes
weak when TP or TA is set to ON, the system
will automatically search another suitable TP
station that is broadcasting traffic information.
“EON” is displayed while this function is
operating.
When the current traffic information
broadcast is finished, the system returns to
its previous TP station.
If a PTY31 (emergency broadcast) is
received, “ALARM” appears and PTY31
(emergency broadcasting) begins. If FM
radio is not selected, all operations other than
switching the SOURCE and switching the
radio band become disabled.
Receiving traffic
information
EON (Enhanced Other
Network) system
Reception of emergency
broadcasts
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eclipse AVN4429 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eclipse AVN4429 in the language / languages: English as an attachment in your email.

The manual is 5,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Eclipse AVN4429

Eclipse AVN4429 Installation Guide - English - 15 pages

Eclipse AVN4429 Installation Guide - German - 15 pages

Eclipse AVN4429 User Manual - German - 112 pages

Eclipse AVN4429 Installation Guide - Dutch - 15 pages

Eclipse AVN4429 User Manual - Dutch - 110 pages

Eclipse AVN4429 Installation Guide - French - 15 pages

Eclipse AVN4429 User Manual - French - 111 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info