Manual Echowell RUBY-100 (page 6 of 13) (English)

581255

Zoom out

Zoom in

1/13



Pul sports-100/200



Pulsports-100/200

E10- -E11

4. AVG, STW, CAL, EXE.TM, MAX, IN.TM, OVR.TM, WT.LOS and

FT.LOS functions will only work while the record function is on.

(WT.LOS and FT.LOS Just For Opal/Ruby 200 Only).

5. %FAT Loss will be displayed automatically when heart rate is

measured. The value will become “--“ while no pulse is detected.

(Just For Opal/Ruby 200 Only).

6. CAL, WT.LOS, %FAT Loss, and FT.LOS mode will be calculated

when the heart rate is equal or over 90 bpm.

3. Reset heart rate record data

1. Press P.MODE to switch to EXE

TM mode.

2. Press T.MODE for 2 seconds to clear the record.

4. Heart rate display description

1. Intensity = Current heart rate / Maximum heart rate.

2. Measure range of heart rate from 40 bpm to 240 bpm.

5. Target zone limit (Refer Fig. D)

1. This value depends on the target zone setup, and the lower and

upper limits are displayed as a heart rate value.

2. The heart rate display is simple and clear and is convenient for

the beginner.

3. The range for each target zone must be more than 10 bpm.

4. The range for the limit mode is from 40 bpm to 240 bpm.

a). Press P.MODE to change to “Limit” mode.

To set the Target Zone Limit:

b). Press SET for 2 seconds to enter Target Zone Limit setting.

c). Refer the Data Setting Processes

Fig. D) Target zone limit

to adjust the Target zone

limit data.

6. Stop watch mode

1. Calculating the exercise time, only works while the heart rate is

detected.

STW

2. The range is from 0 hr. 00 min. 00sec. to 99 hr. 59 min. 59 sec.

7. Calories mode

1. Calculates the calories expended for the whole exercise process,

not only from exercise.

CAL

2. Males expend more calories than females at the same heart rate,

likewise, the female heart rate will be higher than male heart rate

doing the same amount of exercise.

3. Calories consumption will be affected by Heart rate, sexuality,

weight and type of exercise.

4. The unit of calories is Kcal.

5. The range is from 0 Kcal to 9999.99 Kcal.

8. Exercise time mode

1. Calculation and recording the exercise time starting when the

heart rate reaches the lower value set for the target zone.

EXE

2. Total efficient exercise time will be recorded, including the time in

and above the target zone.

3. The exercise time records ranges from 00H00H00S to 99H59M59S.

9. Weight lose mode (Just For Opal/Ruby 200 Only)

1. Calculates the weight loss during exercise. (Including the consumption

of carbohydrates and fat).

WT.LOS

2. Range of weight lose from 0 to 9999.99 g.

10. %Fat lose mode (Just For Opal/Ruby 200 Only)

1. Calories are expended from burning carbohydrate and fat, and

this function can calculate the percentage of fat calories expended.

%FAT

2. 50% of the energy comes from carbohydrate and 50% from fat

when the body is at rest. But the most energy will come from

burning carbohydrate when doing intense exercise, because the

body needs time to use the fat as fuel. Intense exercise will not

help you reduce fat.

3. Fat expenditure depends on the time and intensity of exercise, the

more you exercise the more fat will be expended.

4. Long time walking or jogging will be helpful for reducing fat.

5. At the same heart rate, younger men will have a higher percent fat

loss.

6. The range of fat percentage is from 0 to 70 %.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Echowell RUBY-100 in the language / languages: English as an attachment in your email.

The manual is 1,82 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Echowell RUBY-100

Echowell RUBY-100 User Manual - German - 14 pages

Echowell RUBY-100 User Manual - Dutch - 13 pages

Echowell RUBY-100 User Manual - French - 13 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Echowell RUBY-100 Manual

Product: