424407
14
Zoom out
Zoom in
Previous page
1/22
Next page
Section 3 Description and Operation User Guide
Page 3 - 6 EchoStar International Corporation
© 2004 EchoStar International Corporation
All rights reserved
6. THE MAIN MENU STRUCTURE
The main menu has a tree structure where each sub-menu has one or
more option pages. Each sub-menu allows you to customize the settings
to match your installation. Note that the menu contains dynamic pages
which means that options are, or are not available depending on the
selections you make.
The key gives access to the main menu, that gives you control over
the settings in the Installation menu, the User data menu and the
Information menu.
6.1. INSTALLATION
LANGUAGES
Menu To set the language you want to use in the
menus.
For multi-lingual EPG, if available, the
information is shown in the menu language. If a
selected language is not transmitted, the
information is shown in the native language of
that channel.
1st Audio
2nd Audio
To set the language for programs with multi-
lingual audio.
For multi-lingual programs, if available, you can
choose your own language. The receiver will first
look for the 1st selected language, if not
available, for the 2nd. If the two selected
languages are not transmitted, audio is given in
the native language of that channel.
1st Subtitle To set the language for programs with multi-
lingual subtitles. For multi-lingual programs, if
available, you can choose your own language. If
the selected language is not transmitted, no
subtitle is shown.
NOTE
You can override the selection per channel with use of the alternative
audio and subtitle key on the RCU.
ANTENNA INSTALLATION
6.2. USER DATA
SYSTEM SETUP
CHANNELS
Mux To select the carrier (mux) you want to check for
the signal strength.
View To list the channels that belong to the selected
mux.
Search channels To do a search for all available channels as
available in the selected mux.
Signal level To indicate that you receive a signal (signal
strength).
Signal quality To indicate that you have lock onto the selected
mux (signal-to-noise ratio).
Search channels To do an automatic all channels search for all
available channels as received by the antenna.
Search mux To do a search for all available channels as
available in the selected mux.
The green key allows you to choose between
selection by mux number or frequency and
bandwidth.
Edit mux To edit an existing mux after a change as
indicated by a service provider. This option lets
you change the PID information and the
terrestrial transmission parameters.
Easiest option is to do an automatic channel
search.
Setup favorites To add or delete the highlighted channel from the
selected favorite list. Note that each color
represents a favorite list.
In this menu it is possible to change the favorite
name into something meaningful to you (i-key).
Edit channels To Delete, Move or Rename a channel. In this
menu it is possible to set a channel lock
(Parental control).
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Echostar t 222 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Echostar t 222 in the language / languages: English as an attachment in your email.

The manual is 0,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info